My esprit have bad earth and seems like lot of esprit run into the same problem too, I just have a idea of running a dedicated thick Zero guage earth from front to battery to feed all earth connection to it. have anyone done it before? hows the result?
Welcome to The Lotus Forums
![]() |
|
| Guest Message by DevFuse | |
Better Earth-Does Running a dedicated 0guage earth wire help?
Started by hotsv1, Feb 06 2012 12:11 PM
4 replies to this topic
#1
Posted 06 February 2012 - 12:11 PM
#2
Posted 06 February 2012 - 01:12 PM
If its internal theres a post behind the lower l/h A pillar trim and a live behind the right hand A pillar trim.
Edited by mdw, 06 February 2012 - 01:24 PM.
#3
Posted 07 February 2012 - 01:16 AM
I ran an earth from the -ve battery terminal to the drivers door pillar where the big braid to the door is secured. It fixed issues with fluctuation of instrument gauges and the radio turning off when lights were switched on. A flexible 10mm stranded cable would do it, nice and chunky to keep the resistance down.
Too many Toys are never enough !
#4
Posted 07 February 2012 - 01:45 PM
Would this alaso help with my issues of dim lights? or do they run off a different earth?
Amateurs built the Ark
Professionals built the Titanic
"I haven't ridden in cars pulled by cows before" "Bullocks, Mr.Belcher" "No, I haven't, honestly"
Professionals built the Titanic
"I haven't ridden in cars pulled by cows before" "Bullocks, Mr.Belcher" "No, I haven't, honestly"
#5
Posted 07 February 2012 - 03:39 PM
my issue was when hazard lights on, my plate lights flashes with hazard light (when engine is off), however when engine started, the whole problem goes away, however still sees minor flickering but not so visible. kinda feel like earth problem
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users





Sign In
Create Account




