free hit
counters
Stratton Open Day - 7th April 2018 - The Lotus Forums Jump to content


Stratton Open Day - 7th April 2018

Stratton Open Day - 7th April 2018
Bibs
Album created by
Bibs
  • 27
  • 0
  • 1

0 Comments

There are no comments to display.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Gallery Statistics

    • Images
      4,852
    • Comments
      190
    • Albums
      510

    Latest Image
    16D7FA15-6BC1-418A-B20F-1FAEB72105CB.jpeg
    0
  • Images

  • Image Comments

    • Also updated was the brake master cylinder. Lotus's original part was something over $500 US dollars to replace so I found an AC Delco one for $47 with basically the same cylinder with right hand ports and the same piston diameter, but then I had to replace all of the brake lines which was necessary as the union to the rear brakes was blocked from a stuck valve down line. Even 160 psi wasn't enough to get any brake fluid through to bleed the rear brakes. I didn't find any mention of this part in the workshop manual which was very annoying. Really didn't matter because the rear end had leaked rear end fluid saturating the rear brake shoes at only 28,000 miles making them essentially worthless. Seals failed! The forklift rear end is really problematic and was not designed for a car traveling at much higher speeds and distances IMHO.     
    • The overall shape was really never accepted by the Lotus aficionados. Copied, no doubt, from American Motors Gremlin (1972 even used the same door handles) the rear end design takes some getting used to IMHO. I like it now but have owned the car for almost 40 years. It is a great road car with awesome handling and with the mods I have done, is a lot more reliable. Lots of storage and a very large interior even a large man can be comfortable. This car, in the US, in it's original form is difficult to find someone who actually knows how to work on them and it would not be wise to go road tripping with one too far from home.
    • Red is one of the colors IMHO best suits the Elite. Cardinal Red from a Ford truck color.
      Notice that the dual exhausts look to be plugged but these are ss  "SuperTrap" mufflers many racers have used in the past as one can quiet the noise with the number of radial defusers and adjust back pressure for controlling the hp and torque. Very nice sweet rumble this small V8 produces. Actually quieter than the original Lotus twincam believe it or not.
      Larger 16 inch alloy wheels to accommodate the z rated Dunlap's with slightly larger foot print on the back @ 225 verses the original width of 205.
    • Not seen is an updated heavy duty 10" clutch to match the heavy duty 5 speed transmission. 
      Offenhauser valve train covers dress up the engine with along with spark wire holders keeping them away from the exhaust headers which were ceramic metallic coated, inside and out, to dress up these parts, keeping the exhaust temps up inside the headers for an increase in power (around 10 hp increase to help scavenge the exhaust) all while keeping the engine bay some 70 F degrees cooler. 
    • Same wood Lotus factory used a few years later in their Esprit. I changed 5 somewhat major things I felt was needed to make this car easily more desirable and the factory ended up with the exact same improvements.
      Real Elm wood dash, door and consul cappings, larger 16 inch wheels, electric lifts for the headlight pods and painted window trim body color. 
      And finely, although it took them a lot longer (well after the final Elite version, the Excel went out of production) Lotus put in a much needed V8 in their 2 seater Esprit
×
×
  • Create New...