free hit
Lotus Esprit S3 (1981-1987) - Vehicles - The Lotus Forums #ForTheOwners Jump to content

Lotus Esprit S3 (1981-1987)
By hilly, 21/04/05
  • 1 comment
  1. Canley Trunionless Front Uprights  

    Replacement uprights fitted with stainless steel ball joint instead of the Triumph based units.<br />Direct swap.

  2. Radiator Fans  

    3 11" spal fans on alloy cowling.

  3. Triple Core Full Width Radiator  

    Standard S3 radiator lengthen to full width copper triple core.

  4. Custom Driveshafts  

    Custom Reco-Prop drive shafts to link Audi gearbox drive flange to Lotus rear wheel hub.<br /><br />Gave them the measurement and they made them up with the supplied CV joints.<br />Went straight on and I have had no problems at all, good company to deal

  5. Instruments  

    OEM instruments replaced with Smiths white faced units<br /><br />86mm Speedo and Tacho, 52mm Oil pressure, coolant temperature and fuel level.<br /><br />24 character x 2 line alphanumeric blue back light display showing external temp, battery voltage an

  6. Dash Pod  

    Instrument pod recovered in Black Alcantara to reduce reflections in windscreen from sun light and street lamps.

  7. Rear Bulkhead  

    Rear bulkhead recovered in Black Alcantara.<br /><br />Seat belt guides replaced with new item milled in Delrin.

  8. Head Lining  

    Head lining recovered in grey Alcantara.<br /><br />'A' pillars also recovered in same material

  9. Recovered Door Cards  

    Recoverd door cards due to poor condition of originals.<br /><br />Speaker holes filled.<br />Maxi door handles replaced and relocated.<br /><br />Reds Alcantara insert to match centre arm rest.

  10. Centre Arm rest  

    Replacement centre arm rest fabricated from 1.2mm 6082T6 alloy sheet.<br />Removeable cushion covered in red Alcantara



[[Template collections/front/view/comments is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]
IP.Board Collections by DevFuse
  • Create New...