free hit
counters
The Real Stig - The Lotus Forums Jump to content


The Real Stig

Basic Account
  • Content Count

    111
  • Joined

  • Last visited

Community Reputation

10 Good

About The Real Stig

  • Rank
    LOT
  • Birthday 23/06/1963

More Info

  • Name
    Stig Rahbek
  • Car
    Lotus Turbo Esprit, Lotus Elise S1, Lotus Elite
  • Modifications
    Watercooled turbo
  • Location
    Hornbaek, Denmark

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Solved - I hope. I bought this one: https://www.ebay.de/itm/401917622154?ul_noapp=true The car is wet inside - but in a drying monitoring state. Power disconnected.
  2. My Lukas pull/turn switch perished in flames. Where can I source a "new" one?
  3. Take a look on the Maserati Barchetta chassis: http://www.maserati-alfieri.co.uk/alfieri03.htm
  4. Carnival red is RED Calypso is orange/red like Gold Leaf cars
  5. I have one from a UK 1985 Esprit. I upgraded to the later water cooled version with integrated wastegate. It was running when taking off.
  6. The Elise is quite easy and cheap to maintain. If the engine didn't have a HGF, it probably won't have one later. Gearboxes are rock solid. Suspension bushes squeek, when worn. You can change them over a weekend. Look out for rust in the very few steel items and signs of repairs. Wheel bearing is a wear part. Brakes last very long due the low weight. The suspension GEO is very important on a car like the Elise. Make sure it's correct. Look at tire wear. Well maintained, the Elise will last forever.
  7. I bought a pair of these: https://www.ebay.co.uk/itm/Salter-250kg-Max-Analyser-Electronic-Digital-Bathroom-Scales-Silver-9179-SV3R/262924853590?epid=1853557100&hash=item3d378ae156:g:NNIAAOSwuxFY3ozI
  8. I am not saying, that buying a stove makes you a good cook. However, I bought two identical scales (max. 250 kg) on eBay and used that for corner-weighing. You have to "calibrate" the scales. Eg. stand on the scales and register the readings. Any deviations have to be compensated for on the later readings. 1. Corner-weighing must be done with anti-rool-bar deattached. 2. Car on scales have to be horizontal. 3. Scales must be "calibrated" What you can affect is the cross-diagonal weight balance - nothing else. It's like a table with 4 legs. If one leg is too long, the
  9. I have recently changed the rear calipers on my 2009 Lancia Delta = AR Giulia. The calipers look identical to the VW-ones mentioned here. I guess they are very widely used in modern cars. I would also guess, they come in different piston sizes. Seek and ye shall find.
  10. Here is one for sale also - including a Lotus Esprit Commemorative Edition LHD: https://suchen.mobile.de/fahrzeuge/details.html?id=273466453&cn=DE&damageUnrepaired=NO_DAMAGE_UNREPAIRED&isSearchRequest=true&makeModelVariant1.makeId=15900&makeModelVariant1.modelId=7&maxFirstRegistrationDate=1985&pageNumber=1&scopeId=C&sfmr=false&sortOption.sortBy=creationTime&sortOption.sortOrder=DESCENDING&searchId=12d60d93-8a23-9eb9-9734-2e51a7f9e82e
  11. Tx a lot. This means, that the mechanical connection is disconnected, when the lid is open? This is a "funny" design. Since they changed it on to the S2-design, I conclude the original S1-design was even more "funny". I actually think the 924-design will work even better, as the gear motor can be placed close to the hinges-line in the side C-post.
  12. I looked into the 928 solution. This has a prallel arm system intended for a large window. However the 924 solulution seems to fit. It is a remote gearmotor system powered by wire. Like this: https://www.ebay.de/itm/PORSCHE-924-Heckwischermotor-Wischermotor-hinten-0390216694-Motor-Scheibenwische/401665337881?hash=item5d851eaa19:g:C1MAAOSwwqVcG-B-:rk:9:pf:0 Can anyone take a picture of the S2 (upper window) installation?
  13. Would this item be similar to the original installation? https://www.ebay.de/itm/TRICO-Rear-Wiper-Set-EW72A-Renault-12-Estate-1972-BRAND-NEW/183663408583?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649
  14. Will it be possible to add a warning light to the mechanical/hydraulic gauge? It could save you a lot of money discovering a major oil leak in time (been there, done it).
  15. I know this is an old post, baut anyway.. My gearstick has come apart, and all the parts are as described above. How do you re-install it again? I am thinking about manufacturing an open sleeve to be placed underneath the gearstick - and then press from above.
×
×
  • Create New...