free hit
counters
CHANGES's Content - The Lotus Forums #ForTheOwners Jump to content


CHANGES

Advertiser
  • Posts

    1,461
  • Joined

  • Last visited

  • Days Won

    32

Status Replies posted by CHANGES

  1. Dave

     

    Based on the picture I have just seen of the top of you engine with the cam housing missing I think you may be able to advise me.  Any chance of a phone number so I could call you.  Question is about setting camfollower shims.

     

    Thanks

    Phil

    1. CHANGES

      CHANGES

      Pleased all worked out for you.. It would be nice to put a face to a name sometime,  

      Dave

    2. (See 10 other replies to this status update)

  2. Dave

     

    Based on the picture I have just seen of the top of you engine with the cam housing missing I think you may be able to advise me.  Any chance of a phone number so I could call you.  Question is about setting camfollower shims.

     

    Thanks

    Phil

    1. CHANGES

      CHANGES

      No problem. It may be worth ordering a couple extra shims either side of the one you need..Just in case,   they are only a couple of pounds each and very useful spares for the future.

      hope all goes well .. 

      Dave   

    2. (See 10 other replies to this status update)

  3. Dave

     

    Based on the picture I have just seen of the top of you engine with the cam housing missing I think you may be able to advise me.  Any chance of a phone number so I could call you.  Question is about setting camfollower shims.

     

    Thanks

    Phil

    1. CHANGES

      CHANGES

      Hi Phil

      The sealant will make little or no difference if using modern loctite.. 

      Sounds like you have progress,   You may be able to swap a few around , especially if it was all correct before..  

      Did you make note of the shim sizes and the gaps you have from your last set up .  if so post them to me and i will see if i can see any ways to improve before you buy shims .. 

      ie valve 1  ....  0.096  shim    gap 0.010                                              valve 2 .......0.088  shim     gap 0.015   etc etc.  

      Dave

       

    2. (See 10 other replies to this status update)

  4. Dave

     

    Based on the picture I have just seen of the top of you engine with the cam housing missing I think you may be able to advise me.  Any chance of a phone number so I could call you.  Question is about setting camfollower shims.

     

    Thanks

    Phil

    1. CHANGES

      CHANGES

      No problem Phil , it was nice sharing info with you, feel free to call , always happy to help .

      Dave 

    2. (See 10 other replies to this status update)

  5. Dave

     

    Based on the picture I have just seen of the top of you engine with the cam housing missing I think you may be able to advise me.  Any chance of a phone number so I could call you.  Question is about setting camfollower shims.

     

    Thanks

    Phil

  6. Dave

     

    Based on the picture I have just seen of the top of you engine with the cam housing missing I think you may be able to advise me.  Any chance of a phone number so I could call you.  Question is about setting camfollower shims.

     

    Thanks

    Phil

    1. CHANGES

      CHANGES

      Hi Phil

      You can call me between 9;30 and 4;30 most days.  sometimes the reception is a bit iffy , if you have trouble send a text and i will call back..  Mobile 07889 647406.. 

      Dave 

    2. (See 10 other replies to this status update)

×
×
  • Create New...