free hit
LOTUSPOINT's Content - The Lotus Forums - Official Lotus Community Partner Jump to content


Basic Account
  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by LOTUSPOINT

  1. depending on the amount you will pay for...
  2. This LEGO Project needs your support - go and vote for it!!
  3. Does anyone have a usable set of the light pod springs? (my ones got lost during galvanisation... ) Or has knowledge of any source to buy one?
  4. i have an american one, it's the same but written on it :" unleaded gasoline only". probably you prefer a european version....
  5. as it looks in my gearbox too! important is, that the plastic bit is unworn!
  6. Which is the correct adjustment? In which angle the metal arm get fixed on the flap axle? Version A Version B (The spring an the bolt holding the flap within the plastic part is not fitted to visualize better on the pictures) Many Thanks
  7. I was wondering already why you had two cooling fans fitted and I couldn't see any aircon parts...
  8. I'm looking for a oil cooler, incl. hosing, sandwich plate and the metal bits for fitting. anyone?
  9. They used still the Salisbury 7HA Diff? Higher means 4.1:1? Is it possible to get just the gears! (Shipping reason)
  10. Take a good quality mineral oil (not synthetic) 20W50 (as castrol classic or so) If you change to sythetic oil, it will free all bound carbon particles in the engine - which is not good!
  11. I see i have to plan next hollydays for south wales....
  12. I bought another Eclat in Britain. I got the export certificate from DVLA, which is good, but I tried than to get the information about the car history (previous owners) - answer from DVLA: No Information can be given outside UK...
  13. Hi Mat, Could give me the book title and/or ISBN too. I need to have this book too!
  14. Thank you Mat, It seems to be really seldom... could you do me that favor? Many thanks!
  15. Hi, are here some sprint owners around? I would like to find a good picture of the original "sprint union jack" decal (or the sticker itself), which was usualy sticked on the rear LH side? Thank's for every helpful information! Peter
  16. As I know, it's just for legal and safety reasons. At least in Switzerland you will not pass vehicle inspection without a cam cover.
  17. The are ~3 mm thick new silcone/rubber caskets which should be fittes dry. No drips anymore... Paper gaskets will be much more difficult to fit and then you schould use RTV silicone - and probably it will still lose some oil. Cork sheet never tried, but could be a good idea too!
  18. Hey Mark, what a cool pic! If you zoom on the right front wheel center, it does look like a brand lotus sign...?
  19. I bought some... I will measure them and then we know exactly how they are. In fact it doesn't mater, because having both wheel hubs lying arround!
  20. Dunc, Many thanks for sharing your knowlege, that helped me a lot. Other sources have given me following datas: J6 agreed, but differently PCD 114,3 and R14... (Manufacturer was Ford UK, what seem plausible)
  • Create New...