free hit
counters
FastMatt - The Lotus Forums Jump to content

FastMatt

Basic Account
  • Content Count

    44
  • Joined

  • Last visited

Community Reputation

0 Neutral

About FastMatt

  • Rank
    L

More Info

  • Name
    matt
  • Car
    2002 Esprit

Recent Profile Visitors

944 profile views
  1. My car has been running fine with 511.5 HP at the wheels for quite some time. Still running strong and nothing has broken yet. I beleave these cars are MUCH stronger then given credit for. As long as you tune the car well, and dont power shift.
  2. I still have the car, and it is still running tip top. The car is still for sale, but I still drive it. It is a VERY fun car to drive. I have been occupied with other things, my Dodge Stealth sed a new world record for a stealth/3000gt running a [email protected] (and did it at 3600ft!). Blowing away the old record of [email protected] And By the way I did it on a STOCK mitu short block. Vid of the pass (right click, and "save as") http://www.racingsouthwest.com/~buffhomer/matt973.wmv Time Slip http://www.dynamicracing.com/uploads/973.JPG
  3. holding up just fine so far, just no power shifting I think is the Key. A former VR-4 owner I see. cool
  4. Up-date, to all those that thought "the stock motor will never last at those power levels" Well I have been driving the car at those boost levels and even a few trips to 20psi every time I drive the car. Still running like a champ not even a hick-up. These motors are allot stronger then people are leading you to beleave. Just stay away from detonation and thy hold up just fine. As soon as I get some time I m going to be installing some 310cc injectors in my quest for 550+ RWHP Those who say it cant be done are most of the time interrupted by those that are doing it.
  5. I used the right side rear o2 bung. Yohans ECU removes the rear o2's from the ECU
  6. http://www.dynamicracing.com/uploads/lotusDyno.BMP there is the pulls on a split graph with HP on one and TQ on the other comparing the 2 runs, (the 494 RWHP from befor the AFC, and the 511 After the AFC) here is the latest chart by it's self http://www.dynamicracing.com/uploads/lotusdyno2.BMP
  7. Still on the stock MAP sensor for now. On the boost, I'm running 18psi. On the Blitz DSBC electronic boost gauge. Before installing the DSBC on the car I had 16psi Waist gate Actuators on the car being allowed to be controller by the cars stock boost control. I had checked the boost back then one time buy running a boost line in threw the window hooked to a cheep Automeeter boost gauge and according to that I was getting just shy of 17psi. But I did not really trust that boost gauge. So out of curiosity I hooked up the DSBC boost line to it so just the gauge would work and boost control was back in the hands of the stock boost control, and the actuators that opened on a hand pump at 16psi. Well imagine my surprise when I ran the car and the DSBC logged 19.8psi peek boost. This is were the boost was when I Dynoed 494 RWHP SAE with the sub 10 to 1 A/F. This leads me to believe that the Stock boost control has a problem controlling boost with up-graded turbos, and Actuators set that stiff. After seeing that I believe that a good electronic boost controller is a must when up-grading turbos and actuators. Or maby it wasjust my car
×
×
  • Create New...