free hit
99ESPRIT's Content - The Lotus Forums - Official Lotus Community Partner Jump to content


Basic Account
  • Posts

  • Joined

  • Last visited

Everything posted by 99ESPRIT

  1. Thank you for the great communication your answers are helping me alot, I have bought parts in the past from JAE did you replace the other piston rings and just reuse the top? your compression numbers were really good after your rebuild. Kent
  2. did you have to put in new rod and main Bearings? if so where did you purchase them? i did read that i believe your pistons were ok and you just re ringed the old pistons and honed the liners? where did you purchase your rings? did you do the rebuild yourself? sorry about all the questions Kent
  3. thank you! i`m doing a rebuild and would like to see what your compression was after when your pick up tube broke? thank you for getting back to me. Kent
  4. Just curious what were your compression numbers before and after the rebuild?
  5. would this work in a 1999 V8? I`m in the USA and in need of a ecu.
  6. I have a 1999 Lotus Esprit V8, due to some health issues the car sat in storage for about a 1 1/2, it cranks over very good {new battery) the car does not have spark and I cannot hear the fuel pump power up, air pump relay just clicks as well as the oxygen sensor relay both just click continuously, I did find the 5 amp fuse for the ECM in the rear of the car was blown replaced it still nothing, the ECM connector pin 55 power is good, and pin 59 ground is good, communication line pin 72 data link connector has good continuity, we do not have ground trigger from ECM to the fuel pump relay, and the ECM is not turning on a check engine light, we tried to access the ECM by using the ELM327 and we did download the drivers and we could not get a connection. any help or advice would be greatly appreciated does anyone out there have a bench harness pin out for the ECM? Thanks Kent
  7. I have a 1999 lotus esprit does anyone know where i can buy the rear wheel speed antilock sensor other then buying the factory lotus sensor? is is used on any other vehicles?
  8. I just got a new clutch for my 1999 esprit, does anyone know what i torque the allen head bolts that hold the clutch to the flywheel to?..thanks!!!
  9. I lost the little button that snaps on to the end of my clutch slave cylinder,does anyone out there have one of these??? the part is on and fits my 1999 lotus esprit....thanks for the help and reading the post call my cell 320-295-1335 or email me at thanks!!
  10. Your Nardi steering wheel upgrade looks Great!! I have a 1999 Esprit I would really like to do the same upgrade to....what were the grant part numbers you used to adapt the Nardi wheel to your 98 esprit?
  • Create New...