-
Content Count
229 -
Joined
-
Last visited
Community Reputation
26 ExcellentAbout markw996

-
Rank
LOTU
- Birthday 19/01/1974
More Info
-
Name
Mark
-
Car
Esprit S4, Tesla Model S P90D, YZF-R1, BMW K1300S
-
Modifications
Sports Cat, Grooved drilled discs & Greenstuff pads, Custom grilles, Lotus Marques Custom ABS Switch, Electric CC pump & Plumbed in fire extinguisher if I ever get time to fit it!
-
Location
Bedfordshire, UK
Recent Profile Visitors
-
markw996 started following Who from our group is going to Hethel?, ALDL USB Cable, Chargecooler pump removal and 2 others
-
Chargecooler pump removal
markw996 replied to markw996's topic in Induction/Turbo/Chargecooler/Manifold/Exhaust
Good luck, let us know how you get on. I'ts going to be tricky looking downwards through that top hole if you needed to I just fitted the blanking plug and HT lead bracket. Be careful not to push it in too hard when inserting the blanking plug.. I oiled the O ring first but it was still a bit tight. I almost pushed it too hard and it disappeared right into the hole, but there was just enough lip to lever it back out a touch through the top hole. Just two quick points 1) I have quite small hands so I found it easier to install the blank and HT bracket with my arm do -
I've not seen it done this way before so I thought I'd start a thread in case it helps someone else in the same situation as myself. For all I know this may be the official way, all I know is it was a lot easier than reaching around and under the intake manifold. This way of removal might involve removing the boot floor first. This may be easy for some, or not worth the trouble for others, but I had mine out to do the gearbox linkages and replace my rusty coolant header tanks anyway. It might be possible to do it this way with the boot floor in place, I won't know if you'd hav
-
Charging A/C
markw996 replied to Shaider15's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC
It's pretty easy to do if you have gauges, everything you need to charge it up is easy to access. I bought all the kit to do mine myself.... including a vacuum pump & a 6kg bottle of R12 (very lucky find!) but mine needed repairs, not just a charge. Your biggest issue may be getting the gas (especially if it uses R12) as certainly in the UK it's a regulated industry for environmental reasons. -
Hi Bernie, Welcome to TLF I used to own a 1985 Porsche 928 (S2) but that was about 24 years ago. It was an incredible car to own in my early twenties while all my mates were driving Novas and Corsas..... 12mpg wasn't so much fun though Mark.
-
I'm hoping to pick up a late model Lamborghini Gallardo LP (or maybe an early Huracan) towards the middle of this year once my parents house gets sold, then a factory visit will definitely be on the cards (It's been a miserable couple of years with losing both my parents, so a supercar should make life a little bit more enjoyable from this point on). Still keeping the Esprit though
-
See you there!
-
I didn't realise so I've just Youtubed it! It's a shame, but I think the other 20 or so bikers I'm meeting there would be a bit perplexed if I turned up in a car!
-
Not much help, but I'll be doing it in June on a motorcycle, multiple times! (Staying in Cortina d'ampezzo for a week, about 100 miles from it).
-
I'll be at Bicester on Sunday with my Esprit... but parked up with PH
-
11/11 Breakfast - Pearce's Farm
markw996 replied to ChrisJ's topic in Herts / Essex / Cambs Group's Topics
Hoping to be there this time -
Lotus Festival 2018
markw996 replied to Robert's topic in Lotus 70th Anniversary Party @ Lotus Cars - 29th September 2018
#Metoo Esprit right at the start 33 to 35 seconds! -
Lotus Festival 2018
markw996 replied to Robert's topic in Lotus 70th Anniversary Party @ Lotus Cars - 29th September 2018
Sorry to hear that, I did wave back when I saw you parked there, but it was a bit last minute! (Relieved to hear it wasn't an accident) -
Drive up to the party
markw996 replied to Troy5925's topic in Lotus 70th Anniversary Party @ Lotus Cars - 29th September 2018
On Saturday morning I'm planning to leave Flitwick, Bedfordshire at 6:00am and head up to the factory to arrive around 8:30am via the following route: Baldock A505 Royston A505 Duxford A505 (should be passing here about 7:00am) Thetford A11 I'm sure I'll meet plenty of other Lotus cars along the way so may join into someone elses convoy -
Who from our group is going to Hethel?
markw996 replied to ChrisJ's topic in Herts / Essex / Cambs Group's Topics
I'll be going up Saturday morning from Flitwick (nr Millbrook) direction, happy to convoy up or meet people along the route (A507, A11) -
Lotus Festival 2018
markw996 replied to Robert's topic in Lotus 70th Anniversary Party @ Lotus Cars - 29th September 2018
Order complete too! Thanks Bibs (I only remembered 2 of the 4 digits correctly, and they were in the wrong order.... must buy a pen)