dfp360

Thanks a lot .. I thought everything was shut down. Ordered just now.

Hi all , I know its difficult times for everyone right now but would anyone have a spare working 02 sensor that they could post to Dublin., Esprit SE 1990 SJ dont seem to have them listed anymore. Thanks..

Thank you Travis

Cant seem to find Espritmon anywhere. The Homepages.ipact.nl link has a blank page. Could someone send me the file or give me a new link , Thanks..

Thanks Erik, Id say your right. A lot going on at the moment with a rebuild. Just yesterday one of the oil coolers let go. Anyone got the correct cable for sale . pm and ill take it

Thanks Travis. I will change the cable soon. In the middle of suspension and brake rebuild at the moment.

Thanks for the help. Its an Iocrest cable that i use but its connected through a 16 pin obd2 adapter to the 10 pin ALDL . No rxd light active on the cable just the green txd light.This might be the issue. Fiffo buffers and 16550 UART - dont know about these. There was a post recently with the same data issue but no follow up with it. With Espritmon I have no data. I have the graphics page . Do I need to start the logging manualy. Com port is 7 and correct mode (0).

Thanks ,but I cant get any data to display on espritmon.

Any ideas with this one . Wont display iac, map etc. Just mph,rpm, coolant temp and volts. Connection is ftdi serial to usb on com 7 set at 100ms.

Anyone got an Se fog light for sale . Thanks Dave.

Thanks , Ian. As you can see my manual is a bit worse for wear.

Thanks for that. So on a 90 SE the block with the red star is free ?

Hello all, New member here. Have just aquired a 1990 SE and working my way through some issues. Firstly I would like to thank you all for the wealth of information you make available. Its helped me a a lot. Can someone tell the correct position for the engine check relay. See attached pic. Is it the the block marked yello or red. Also this might be of use to someone Had a code 13 , 26 & 44 . Cleared after I found the green wire out from the changeover solenoid block - far right . See other picture. Thanks , Dave