free hit
counters
Seriouslylotus's Content - Page 3 - The Lotus Forums - Lotus Community Partner #ForTheOwners Jump to content


Seriouslylotus

Basic Account
  • Posts

    760
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by Seriouslylotus

  1. Sofware is the same Re the models you click the model and them scroll with the LHS buttons. Later firmware is available via RS3, you will need to update RS3 to get the updates
  2. Its not currently, But if new cables are made then it probably will retro fit, Just having some made so i can fit one into my project Elise
  3. OY stop saying nice things about me Tip = look for VX220 bolts
  4. Yes it does, well it does on the couple i have fitted to Cup cars Yes same binnacle
  5. SW 3.34.02 is the RS3 software, nothing to do with the dash firmware. Start a new configuration in RS3 and re-flash the dash The decimal places are all programmable in the RS3 configuration Dont forget to select the correct model year of software in the dash once its updated
  6. The dash units are the same. Its only the binnacle that's painted on the lotus one, But that wont fit the 2004-2007 white dash non airbag car anyway. You will need to 'sort' the control buttons, unless you find some who has sorted that point😏
  7. Yes I have done a couple including one in my own Elise project car. You are correct the binnacle doesnt fit, I modified the binnacle and made up some buttons to do the job
  8. Its has been requested many times, so is on the list. However as its not a 'fault' or 'glitch' its on a very low priority, Aim used the standard lotus dash as the basis, that has a 9000rpm scale. If they ever change it there would then be complaints from people who are upgrading there engines to rev higher. The dash was designed to please most of the people most of the time. If someone wants very specific function one of the other AIM product that is fully configurable are available, but with the data logging etc etc are significantly more expensive than the MX2E, and working out all the signals, alarms and messages would take an age (I know as I had one about 5 years ago) Having tried both I will stick with the MX2E as it does far more than I was capable of getting working on the other models available
  9. Fix for odo 6th digit is in the next firmware release (Just tested the beta version))
  10. Does reverse work? Not designed to work with reverse, so no it does not
  11. 1. Clock cannot be set to East coast USA time. Updating software fixed the one i had, but you can still set the clock, mine jumped 2 hours when saving so i set it 2 hours early, then it tld the correct time 2. Gear selection indicator is completely wrong. 1st says 2nd, 2nd says 4th, 4th,5th and 6th all say 6th. Reverse says N, Did you do the gear calibration, if not you MUST do this 3. HVAC lights are out, Software update coming, It does actually work but is set to 1% so you cant see it,
  12. Reload the software. This fixed the clock on the dash i could set it on. Old HVAC brightness is nothing to do with new back light, have ask Aim for feed back after carrying out a few tests on the back light (had a new dash in my own car for testing)
  13. In settings go to camera You can disable/ enable camera 2 Or disable enable all cameras
  14. Turn off the second reverse camera in the settings, then its one press
  15. leave connected. Its used to turn reverse camera on if fitted (1 second press) Reset trip meter one (5 second press) Turn on/off data logger for road screen (10 second press)
  16. The dynamics of a rear wheel car and especially a Lotus are TOTALLY different to a Front wheel drive car. We raced C1 Citroen's in endurance racing the rear was set to 1.25 overall degree toe out. An Exige V6 with rear toe out would be terrifying IMHO
  17. DO NOT splice a wire. It will not be needed Probably a glitch and WILL be fixed by AIM im am 100% sure as they are very very good
  18. 3Eleven has a Quaife LSD as standard, with essentially the same traction control etc as the 430 Cup Exige, So the factory have already done it on a platform that is essentially a V6 Exige (Front suspension arms are a little longer, steering arms slightly different, but thats about it)
  19. Reflash the 79 software to the dash, then reselect the correct year configuration. That sorted the clock on one that i was presetting (It jumped two hours forward each time i tried to set it)
  20. Should be on all the time side lights are on What is the serial number of you dash?
  21. Im in the process of a few upgrades on my 3Eleven. I bought a 400 series Y pipe from Lotus and can tell you the Y pipes that connect to the manifolds are 60mm and after they join at the Y the pipe is 76mm The Lotus Quiet silencer is also 76mm inlet and outlet
×
×
  • Create New...