free hit
counters
razad's Content - The Lotus Forums #ForTheOwners Jump to content


razad

Basic Account
  • Posts

    72
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by razad

  1. Good thread. I have one ICS7 at home, still not installed though.
  2. Not that I remember Haven't driven the car for almost 5 months because -20 degrees and polar bears on the street
  3. My stock pads got worn out pretty quickly. Got PFC08 after that.
  4. Sorry, was -1.5 in the front. I guess all cars are individual and with all shims removed it was not enough so we removed the ABS-sensor on front right and attached it a bit higher up. It's in swedish but you'll figure it out. 😃
  5. I've been doing 370 tracked laps on my Cup2s this year and tried to keep 29F/32R at all times. No problems at all. -1.4 camber in the front and -2.1 in the rear.
  6. Really have to drive on that track next time I am in Dubai.
  7. Running on slicks. That's why he can go more agressive.
  8. I was thinking something like this recieving at 434MHz https://www.ebay.com/itm/Solar-Wireless-TPMS-LCD-Car-Tire-Pressure-Monitoring-System-4-External-Sensors/253867796136
  9. When driving on track I have 2bar in the tires hot. fter after a longer break (lunch) the pressure is about 1,7-1.8. When starting the car I get the "low pressure" light. What I would like to know is if it is possible to read the signal from the sensors with a reciever fron ebay that you can put on the dashboard.
  10. I use a small analogue gauge that fits in the pocket so I can check the pressure directly after entering the pits. I kow the new exiges have tpms since a "low tirepressure" light goes on when pressure is low. Would be nice to be able to read out that signal somehow and see it while driving. Through the obd2 maybe?
  11. The 430 has channels inside the wheel arches taking air from the front and out the vents above the wheels. The 380 doesn't have these.
  12. I run PFC08 on my car and use a wheel cleaner from a local producer (lotus driver). Makes the wheels look like new after every clean. https://tershine.com/collections/frontpage/products/relive
  13. Drove around 70 laps at Spa tuesday and wednesday this week. Limit was 107dB so no problems for me. So now after 370 laps on track it's time for a new set of tires.
  14. Did they actively measure the noise? How many dB did you have? I drove at a local track a few weeks ago with a 105-limit and just exceeded that limit.
  15. Had to check my logs driving back here in Sweden. Gear change 4th to 5th gives more loss than 3rd to 4th.
  16. I bought one and will bring it to Spa this week and use it.
  17. Dry weght of my Cup 380 is supposed to be 1056kg but with all the fluids and full tank the scale shows 1140kg. And with a driver, over 1200kg. That is a higher kg/hp ratio than my old 260hp exige S2.
  18. Track day in Sweden V6S vs Cup380
  19. Yesterday at a track day i looked at two friends Exige 430 and their vents looked closed compared to the 380. Apparently there are some kind of scoops that brings the air from front of the wheel arches to the opening on top and through. Have to look into that further though. Maybe it is a better solution than the 380.
  20. Mine are not see-through but with plastic covers under the holes However I guess that during driving the airflow opens them up as there is dirt in top of the covers after a driving session.
  21. Mjölby are well experienced and I don't think you will be dissapointed. Also join the swedish forum on FB for regional help and experience from local members.
  22. Same here. Hade to change mine after 4500km. Now running PFC08 all around.
  23. Been driving on four different tracks, all clockwise. Did a geo setup before tracking and damper settings are untouched from factory.
×
×
  • Create New...