free hit
Mark_Graphic's Content - The Lotus Forums - Lotus Community Partner #ForTheOwners Jump to content


Basic Account
  • Posts

  • Joined

  • Last visited

Everything posted by Mark_Graphic

  1. Unfortunately its not. I have however tracked down a used regulator unit at a very reasonable price.
  2. Hi chaps Ive had a look through some previous drivers window issues but I can't find one like mine. I open the drivers door and the window doesn't instantly drop. It does however drop and raise a couple of times while the door is open, but always ends up... up! It's almost like its confused. Ive been through the reset process but this hasn't helped. Any ideas? Thanks in advance.
  3. Hi Gavin It hasn't given a code and I can't hear any squeal so ill get it re gassed to see if its holding pressure. Thanks
  4. Hi chaps I think my compressor has given up as when the AC button is depressed, I can't hear or feel the compressor start-up and there is no difference in the air temperature coming through the vents. I've checked the fuse and it's ok so that can only mean the compressor needs replacing. Any other checks I should do or ideas would be very welcome? Im aware that Lotus want a small fortune and they can be sourced very reasonably elsewhere. Thanks in advance M
  5. Hi chaps I'm trying to find the correct diameter for the air ducting in my Evora engine bay and also a good place to buy it from. Can anyone help me with this? I've attached a pic for reference. Thanks in advance.
  6. Hi Ric Firstly is it worth having the upgrade? Is the extra power and torque really noticeable and how does the soundtrack change? Thanks
  7. Hi guys Have any of you chaps had the 390 upgrade? M
  8. I did all that first as I knew I would probably get a smart arsed response from someone. Thanks though. I was just interested in what anyone on here had had done and I had induction on a previous Elise and and Exige. The added noise was great. Hanagar 111 supply and fit a kit which includes a remap with an estimated a 15bhp power gain too.
  9. Morning chaps Im thinking of getting an induction kit fitted to my Evora S. Can any of you offer me any advise of what to get and who to get it from? Cheers
  10. Hi chaps Have any of you guys got a pdf of the service notes that refer to centre console removal / leather gear stick cover removal / gear knob removal etc? Thanks Mark
  11. Hi Colin Have done this replacement yourself as I couldn't get the blue tabs to compress far enough? Im assuming the grub screw (36) doesn't need to be loosened? Thanks
  12. I should have said that I've successfully removed and replaced the original gear knob. Its the lift tube I'm struggling with and the part you refer to is the spring.
  13. Hi chaps Ive just replaced my leather gear knob for a stainless steel one. The lift tube (part 34/34a) is scuffed and scratched so I ordered a replacement too. The thing is I don't know how to replace it. Ive looked at the DeRoure parts diagram (attached) and it looks like ill have to remove the leather cover and loosen a grub screw (part 36). Has anyone else replaced their Lift tube and if so can you help? Thanks Mark
  14. Hi chaps The boot release stopped working earlier today on my Evora S. It was trying to open the latch but couldn't. So I opened it using the manual release. Once into the boot I removed the plastic cowling that covers the release mechanism to investigate the problem. The part that attaches to the latch which pulls it back when the motor is activated had come off. I had a fiddle around but couldn't work out how to re attached it. So I closed the boot to see what might happen after my fiddle around and now it won't open at all, not even with the manual release. I'ts making the clicking noise but just won't open. Any ideas how to get into it? Thanks in advance. M
  15. Afternoon chaps I need a grommet for my Evora. Ive posted a pic of the one that's missing. Any help on what to order or where to purchase one (or a pack) from would be great. Thanks
  • Create New...