brienchia

Thank you so much. What sealant would you recommend to reseal after job is complete? Oh yeah forgot to ask, do I need to test the circuitry individually with a meter or is this a known fault with a particular joint? A photo would be really helpful here. Thanks so much

Is there a way to diy solder the joint? I am experienced in diy electronic soldering but would hope to learn more before having the car up and starting the job

Thanks I'll check it out will update if fixed

I have a similar issue with my 2010 Evora. the right side front indicator works, but occasionally doesn't (and the blinking speed increases a lot). Seems to fix itself when the car is cooled down...I'm thinking is just a solder or connector problem?

Thanks, that's given me a bit more confidence. Any ideas on the parts that I need to get?

That's what I thought too, since the remote does it. Has anyone here successfully installed it? Part numbers and photo instructions would be a god-send. Thanks a lot! Photos meaning you've done it before? Think that removing the dash for this mod would be an intricate job. How to pull the trim panel?

Hi there, I'm new to the forum, recently got a almost new 2010 Evora NA. Is really a sweet ride but want to update it a bit to make daily life with it more bearable I'm quite tall, about 6'2, with a long torso, and sitting in my preferred upright driving position, leaves limited visibility. I can even the road fine, but traffic lights and overhead road signs are difficult. Exploring the driver side seat, I found these 3mm spacers under the seat rails. They seem to me like one of them is a belt mount for securing a child seat. Both driver and passenger seats have them. I've removed them and reinstalled the seat, and visibility is slightly better. Are there any adverse effects from removing those spacers? There are also spacers on the the seat mounting to the rails, but those seem to be for the belt buckle mount.

Hi there, I'm new to the forum, recently got a almost new 2010 Evora NA. Is really a sweet ride but want to update it a bit to make daily life with it more bearable I'm quite tall, about 6'2, with a long torso, and sitting in my preferred upright driving position, leaves limited visibility. I can even the road fine, but traffic lights and overhead road signs are difficult. Exploring the driver side seat, I found these 3mm spacers under the seat rails. They seem to me like one of them is a belt mount for securing a child seat. Both driver and passenger seats have them. I've removed them and reinstalled the seat, and visibility is slightly better. Are there any adverse effects from removing those spacers? There are also spacers on the the seat mounting to the rails, but those seem to be for the belt buckle mount.

Hi there, I'm new to the forum, recently got a almost new 2010 Evora NA. Is really a sweet ride but want to update it a bit to make daily life with it more bearable. Other than the key and the emergency level under the back seats, is it possible to install a boot release button on button cluster on the dashboard? I realize the newer S1 evoras after My 2012 have it as standard?