Single Status Update
Glyn Hi I see that a few years back you had issues with the gear selector. I was unable to get reverse even after new translator bearings at the rear., I then took the gear stick out and found this . Missing pin and worn bush. Do you have a diagram of how this supposed to be set up .
Thanks 1988 Stevens Esprit Carb turbo. Translators are on the left hand side of the gear box looking from the back
- Show previous comments 1 more
Oh, and there is an upgrade you can do at the rear. If you still have the selector shaft going through that floating ball thing in a bracket, you can replace it with this instead.
It takes a load of play out of the gear selection and makes it much more positive.
37 and 38 are replaced with item 50, as below.
Also, there is a good write up on Lotus Esprit World that will help you loads, and shows these bits.
Glyn Many thanks that's brilliant. Thanks for the swift reply
No problem at all.