-
Posts
53 -
Joined
-
Last visited
About G. Bell
- Birthday November 20
More Info
-
Name
G. Bell
-
Car
Evora Launch Edition, Mazda RX-8
-
Location
Cambridge
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
G. Bell's Achievements
-
A side step but Evora v’s a 43” monitor:
-
Rear view with ducktail tailgate?
G. Bell replied to G. Bell's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other
That is really useful! -
More or less. I didn't fit them myself but there was issues getting them secured. They also needed more than just painting to get them finished properly. Even then there are flaws. Yes, I am looking to get the passenger headlight replaced soon.
-
“Evora GTE front vent covers”
-
Long for the month done!
-
G. Bell started following Struggling to remove HU and Jacking points for getting all 4 wheels off the ground?
-
Struggling to remove HU
G. Bell replied to G. Bell's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other
After much faffing about I've found someone had put a cap head bolt into one of the mounting threads. This was hitting some of the fiberglass dash and needed to be removed before you could remove the HU. 🤬 -
Struggling to remove HU
G. Bell replied to G. Bell's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other
Thanks for the advice still stuck and left scratching my head. -
I'm struggling to remove the HU from my Evora. I've got the dash trim off and removed the 4 bolts holding the HU mounting frame. But no matter what I do the right hand side of the HU gets stuck against something very solid after pulling the HU out about 2-3cm. The feeling is two pieces of metal hitting each other and there's a dull clunk when it gets to this point so I don't think it's cables getting stretched. Any ideas how to get beyond this point? I've been messing about for around 90 minutes.
-
Well it's a metal plant pot holder not a teacup and saucer. 'twas my first choice as everything else I could find was ceramic, glass or very dirty.
-
To spread the load of bike. The first time I drove a decent distance with the bike, it left an impression in the leather which you can still see (if you know where it is).
-
So when I purchased my Evora a few friends said it'd get swallowed by a verge! Turns out they had the right words, in the wrong order...
-
Anyone tried 275/35R19 rear tyres?
G. Bell replied to G. Bell's topic in Ride/Handling/Suspension/Brakes/Wheels/Tyres
I got quite bad tram lining with my, 6 year old P Zeros which has been virtually eliminated by the PS4 setup. Point of interest I got about 8k out of my rear tyres going from 7.5mm to 2mm of tread. Also I'd consider 3mm tread minimum death before replacing. -
Anyone tried 275/35R19 rear tyres?
G. Bell replied to G. Bell's topic in Ride/Handling/Suspension/Brakes/Wheels/Tyres
That sums my type of driving and on-road driving style. If I was to regularly track the car I'd be looking at a second set of wheels with something really sticky on like MPSC2, Toyo R888, etc.