free hit
Jonas's Content - The Lotus Forums - Official Lotus Community Partner Jump to content


Basic Account
  • Posts

  • Joined

  • Last visited

Everything posted by Jonas

  1. do the lower links go in special way or are they the same left and right?
  2. how much should the "preload" on the thrustwasher be? I´ve seen 2mm but can´t find where it saw it.
  3. just realized, I need a longer input shaft. Any tips?
  4. Whats with the flats? Is it oriented any special way?
  5. still looking for the measurements of the wisbone mod, if someone has a set without bushes, I´d be very greatful for the service. 🙂 Inner dia and lenght of the tube
  6. I might need one as well, pilot bearing surface is shot, please quote me too Harry. S1 78.
  7. As there probably where not any polyurethan bushings around when the decision was made to upgrade the arms. Could I get away with just mounting Opel Polybushings ?
  8. The ones from Sjsportscars, all bushings. Yes they I'll do the mod, would be helpful if someone could provide me with the measurements of the tube to be welded in, bushings are ordered but No idea when they Will arrive.
  9. says vented
  10. Do any of you have any experience with Tarox ventilated front discs?
  11. Guess this is why they were modified. Do I Keep the Shells when installing poly bushings?
  12. It seems I have the only ones in the world that has not been modified, Does anybody know the specifics about the mod? what size is the sleeve that I need to fabricate?
  13. Does anyone have a great tip for shocks? I'd love coilovers but not sure if that's available. Will replace all bushings and joints.
  14. A pig to get out but in good condition, no rustwelding required, one piece of sheetmetal in the rear has previously been cut out, that will be replaced, just a clean and new paint, thinking 2coats of epoxy primer and 2 coats of raptor bedliner? 3hours later...
  15. As I understand it you should mount it at an angle with the the front lowered first and the rear quite high, look in youtube with the lotusfactory film, there is an episode where the body is mounted
  16. sorry, I wont use them so I feel its better they go to someone who need them instead of gathering dust and fall apart on a shelf in my less than humid free garage. with that said, I wont give them away, I know their value.
  17. Any chance of getting a drawing for the bellhousing adapter?
  • Create New...