Theshur
-
Posts
26 -
Joined
-
Last visited
Theshur's Achievements
-
Hello, I'm trying to increase the noise 😈 and in the process if possible to free up the engine a little more. Replacing the original catalyst with this one without any other modification will meet my needs or is it necessary to change other elements (like manifolds)? https://www.larinisystems.com/collection/lotus/exige-sport-410cup-430/larini-sports-exhaust-catalyst-larini-manifolds Your opinion? Thanks in advance. Shu
-
The resistors are installed and it works wonderfully 🎉 Shu
-
Greg response me And send me resistors 😉 Very good service!!! Shu
-
Theshur changed their profile photo -
only problem, the indicators are faster than normal ..
-
And the GRP Tail Light 😍 before: in progress: final : Shu
-
Need help suit stone
Theshur replied to Theshur's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other
On photo -
Hello, I caught a stone on the front grill, just above the carbon blade. Could you take a good quality photo (exige 410) of the front grille and especially what is behind it, I want to make sure before driving that nothing has been damaged behind the grille. a big thank you in advance Shu
-
In Switzerland, we have two 390 FE to sold: https://www.autoscout24.ch/fr/d/lotus-exige-coupe-2021-vehicule-neuf?vehid=8605702&accountid=61796&backurl=%2Fvoitures%2Flotus--exige%3Fmake%3D48%26model%3D674%26vehtyp%3D10&make=48&model=674&vehtyp=10 Shu
-
Dumb question but how do you wash it when you use it without the roof? Do you put it back each time with all the screws or simply put it down without screwing everything in? Shu
-
A little video of the beast where I take the opportunity to weigh it. 1140kg with a full tank of gasoline. IMG_1206.MP4 Shu
-
Carbon fibre options
Theshur replied to BatMobile's topic in Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other
Any news about that? -
Thanks Ramjet! I would like my order for the rear lights from GRP to arrive faster 😜😅 More seriously, I posted pictures in this topic: Shu
-
From https://www.gregsraceparts.com Shu
-
yes, I saw this solution but it is temporary, I will install the button that will allow me to control from the cockpit as on the 350. The garage confirm me it’s OK (only in 410, it’s not possible on 430). So I do not want to cut the pipe Shu
-
And there you have it, two elements are put in place, but not without difficulty. When it comes to disassembly, you have to go carefully but hard enough, no original part is broken 👌🏻 Otherwise you have to adjust (file) all the carbon parts, they are not exact. Once, the result is great! Pictures Shu
