free hit
counters
jackettc's Content - The Lotus Forums #ForTheOwners Jump to content


jackettc

Basic Account
  • Content Count

    44
  • Joined

  • Last visited

Everything posted by jackettc

  1. Hi I am using Free scan, and it is reporting the following error. Before I start trying to work out what the root cause it, I need to know if it is indeed a 26 B error, and if so if that list correct, or should I be looking at 26 A Components for the cause of the error? So basically which one of these 2 lists should I be looking at, as apparently Freescan misreports A/B:- 26A: Radiator Fan Relay Wastegate solenoid Canister Purge Solenoid Check Engine Lights 26B: ROM relay (?) A/C Control Relay Engine Overheat Relay Throttle Jack Sol
  2. Hi, Any idea how hard it is to swap it? Like clam off or not? Mine is dead and can't find a fuse Got a link to that one on eBay? Thanks
  3. Hi all, I've tried some Nitrons (46's and now Clubsport 40's) for the first time this year on my 2015 Exige V6, and over really harsh 'jolts' like a squared off ridge in a road, I get a 'clank' noise. Most of the time however they are quiet. Does anyone else have Nitrons, and do you have this same issue? I was thinking it is because these are rose jointed as opposed to having rubber bushes. Also the noise seems to improve as they 'warm' up! ... Odd. Also does anyone know a decent place to get corner weighting done near to Reading, Berkshire. Thanks.
  4. Many thanks, contacted BOE for more information
  5. Looking at that diagram, isn't that an awful design for airflow?? Other than the overpriced Komo-Tec cold air intake (£1,500 with remap!), does anyone know of an alternative to get rid of, or modify this thing? And have Lotus changed this on any of the later cars like the 410, 430's, etc ?
  6. I put these in. Much better bass and overall sound. Big improvement over the originals, and no mods to fit even with a harness bar. http://www.jlaudio.co.uk/c2-525x-car-audio-speakers-c2-coaxial-systems-99613
  7. I've just got my Schroth 4-point harness for my V6. It has a bag of washers for the lap belt. Does anyone have any idea what washers go where? A photo would be good I have checked the install instructions, but they didn't help. BTW I installed the Simply Sports Cars harness bar myself. Very nice bit of kit
  8. jackettc

    jackettc

  9. Hi, I hear Chris Randall has his own variant of the Nitron NTR 1-way 46mm suspension kit, available only from Hoffman's. Has anyone here had this kit fitted, and if so have you got any feedback, like is it too much on the road, and what is the improvement on track, etc. Thanks.
  10. Hi, I had the manifold. I've sent a message to 'hopo', who might be the right person
  11. Good to meet some new faces today, a good turnout considering. Does anyone know how to contact the owner of the Black/Gold Esprit, as he needs a manifold and I have one lying around somewhere And thanks to Alan and Pat. Was great to see in the workshops!
  12. Thanks so much for the replies, easy when you know how. From the pictures I worked out you can just push it in from below when the roof is on! Cheers Chris.J
  13. Hi All, I lifted the hard top off my Exige V6, and the fat roof seal on the back dropped off! I have no idea which way round it goes back on, and I have a track day tomorrow. Can anyone help please, as I've searched the internet for pictures, etc. Pictures are below (Sorry about the legs http://1drv.ms/1MOa0Tw
  14. I don't mind swapping my 3.25. It means I can get back in time to watch the F1 replay then
  15. Hi, I have a sad question ... Is there anyway to clean your car before the shoot, as photographing a dirty car will be a shame and it looks like rain for the drive down I can bring a few bits in the car, but could we get hold of a bucket of water, etc? Also does someone have an agenda for the whole day so I can decide how early to get down there. Thanks. Chris.J
  16. I've talked to people from mine. The standard car is pretty good. More sound deadening than the older Exiges
  17. I bought the really light stuff version and bolted a RAM mount holder (push fit version) to it. Then I used a twin usb cable to power the phone and still use my usb stick for the standard head unit. A nice clean tidy solution. Oh an no wobble either. I can send pictures and part no.s if you are interested.
  18. Umm could be an interesting opportunity, but I've only just hit 800 miles and don't want it thrashed. Drop me the details though
  19. Sold my Exige S :( But just bought a new Exige V6 :)

  20. Umm but those new seats are soooo nice MY12 it is for me, just got to decide on manual or IPS and work out what colours I like, currently:- 1). Carbon Grey 2). White 3). Laser Blue That grey one posted earlier does look very nice ...
  21. Esprit MOT tomorrow. First time on the road in 2 years ;)

  22. Is there an IPS or NOT IPS topic, as it looks OK on here:- https://www.youtube.com/watch?v=8uZnempaUz0#t=92
×
×
  • Create New...