Single Status Update
Your the man for a strange issue on an SE. Starts and idles fine at between 750 and 1,000 RPM. Try increase revs gets to about 1750 and starts to hunt then missfire. Tried Esprit Scan and no faults recorder. It did have TPS issue which we replaced, set at correct values. But still the same. HELP.
- Show previous comments 8 more
Will pull it and check it thoroughly today.
Found the bugger at last. Bloody flywheel sensor. I thought it HAD to be something near where I had been working. o back tracked and pulled the sensor plug and had another look at ti and thought to myself, one wire's not as far in as the other. Small screwdriver and pushed it further into the plug, tried starter and throttle and away she went. It must have been getting just enough volts to start, but not enough to accept load.
Thanks for your help bud, much appreciated your suggestions.
TLF must be the best forum for assistance in all things Lotus, and more.
Happy bunny now, I can get the bloody thing off my ramp and get back to LotusRescue serious work. My S3 turbo restoration.
No worries mate! I always go with what was last touched!