free hit
counters
J400GED - The Lotus Forums Jump to content

J400GED

Basic Account
  • Content Count

    208
  • Joined

  • Last visited

Community Reputation

1 Neutral

About J400GED

  • Rank
    LOTU

More Info

  • Name
    Ged Sidnell
  • Car
    Audi S4
  • Modifications
    Alpine W505R
  • Location
    Ex Hethel, now Hingham
  1. Give Gerald Turner at GST Performance in Newmarket a call on 01638 661144.
  2. PRICE REDUCTION. These are now £600 for the pair. That's less than it would cost to re-trim a pair of seats. Ged
  3. Try these for size. Both seats have a small white mark on the centre line - you can just see it in the picture of the passenger seat squab.
  4. Thanks Bibs, I had better take some pics then! They are straight forward to fit, the most you would need to do is to drill 4 holes (through the floor) per seat and then slot the new seat in and do up 4 nuts. I'll go and sort out the pics. Ged
  5. Alan, If you don't already have them, what you need is a pair of V8 comfort seats - I happen to know of a pair in that colour that are for sale!
  6. No sorry mate, a pair of comfort seats and a pair of front spring/damper units, but no sunroof stuff.
  7. Alan, Why mess around with all that? Get yourself an S4 heater panel, then use the framework as I suggested earlier on! That way all you need to do is adjust one part, rather than getting this made, getting that made, fettling this, changing that...... Ged
  8. Yes Paul, I wonder......... You don't still have the original do you? Just in case Alan gets his act together.
  9. Alan, I still have the frame from an S4 in the above pics, unfortunately I don't think I have the heater control panel though.
  10. That is how mine started out. Mine was an 89 Turbo. Cut out the heater control panel from the frame and bin it, cut out the thin piece that goes across above the single DIN radio aperture and bin it. Get an S4 heater control bracket and weld it in in place of your current one.
  11. So, yes it was a local sale then!
  12. The heater panel is an S4 heater panel. I drilled out the spot welds that hold the HVAC control knob bracket and re-welded the bracket and therefore HVAC control knobs at the bottom of the heater frame, thus giving enough room for the double DIN unit above. Simples!
  13. Paul, How far from you is Mildenhall? It's probably more local to you than me. Cheers, Ged
×
×
  • Create New...