Web
Analytics Made Easy - Statcounter
Dunc - The Lotus Forums - Official Lotus Community Partner Jump to content


Dunc

Full Forum Member (FFM)
  • Posts

    2,229
  • Joined

  • Last visited

  • Days Won

    5

Dunc last won the day on May 4 2015

Dunc had the most liked content!

About Dunc

More Info

  • Name
    Duncan
  • Car
    80 Lotus Eclat S2 V8 + 76 Eclat S1 520
  • Modifications
    quite a lot more of all the good things...like torque, cc's and bhp...

Recent Profile Visitors

14,599 profile views

Dunc's Achievements

Contributor

Contributor (5/14)

  • Reacting Well
  • Very Popular Rare
  • First Post
  • Collaborator
  • Posting Machine Rare

Recent Badges

427

Reputation

1

Community Answers

  1. The register is kind of dormant at present. Its not online - its on a laptop. As I look to get more time, I will try and update it and see if we can publish the bits that aren't personal data within the meaning of the prevailing legislation.
  2. Judged by modern standards, brakes on an excel are tragic. Dont be fooled by thinking they are disks all round and will be decent. The splitter valve essentially turns the rear ones down to marginal to avoid rear wheel lockup, and its all about the front ones, but single pistons on sliders from an 80's celica aren't about to impress anyone. I looked at fitting twin piston ones from an ABS spec Previa, which I think bolt right up to the original carriers and would give a bit more friction surface and a decent increase in clamping area, but I sold the car before I did anything with them/investigated further. The twin cam isn't unreliable - I wouldn't swap it out for better reliability. Engine swaps get done when people want more power -v8 noise , or avoiding the high cost of rebuilding a Lotus 907/912. Componentry is comparatively expensive on a Lotus engine. Standard eclats/elites/excels arent particularly quick, despite the looks. Its the handling and road manners which makes them sporty.
  3. driven gently on a 70 mph motorway run, I can get an 18mpg average. Its a 4.6 with big valve heads and a lumpy cam on an edelbrock 500 quad barrel and a 4.1 diff, so its not exactly set up to be economical. The v8 cars I know of have engines fitted, but are not runners and have not yet been runners. They would need fettling on the ignition side and usual project ironing of issues.
  4. prices wont go down any time soon - general consensus is they have been very underpriced vs their peers for some time. If you want a V8 engined one, and your a capable mechanic, drop me a line as I have leads. I've owned 5-6 lotus, including an excel and eclats. Everyone has their own favourite. There are no "bad" driving Lotus, only unmaintained/tired ones. My weapon of choice is the V8 conversion, you just have to be a bit careful not to get one that's too undergeared or it becomes a very thirsty machine. Whether this bothers you or not depends on how often you are going to drive it. I can get mine to average single figure mpg when booting it away from the lights around town. On the points above - for a weekend toy, I don't really follow the excel choice. The items that made Elite's a pain in the bum in the 70's and 80's were things like driveshaft UJ's that wore out every 5-10k miles, and mild steel chassis that crumbled. 5-10k miles is probably 4 years running for most elites and eclats nowdays. I wouldnt bother with efi.... mapped ignition perhaps, but its fine on carbs.
  5. Virtual meetings still happening? Had a life change and no longer working ridiculous hours for an employer. I might actually be able to make one for a change! Hope everybody is well and had a reasonable start to 2024! Dunc
  6. Hi Graham, What you are describing is called micro blistering. it is caused when paint is applied to fibreglass and droplets of moisture get trapped between the gelcoat and the paint. When the temperature dips below freezing, the moisture freezes and expands, creating a small blister, which then fractures the top layer of the paint. Its quite common - I have it on one of mine - it is a result of a poor respray that didnt get the gelcoat completely dryed out, or had too much moisture in the paint. Spraying fibreglass well is not an easy thing to do, which is why bodyshops that can do it well, charge a lot of money. Also if your car is stuck in the sprayers oven, he (or maybe she) isnt painting other cars, so they charge more for fibreglass.
  7. its a far nicer drive without power steering. Its heavy at parking speeds, granted, but on the move its perfection. i hadnt driven a power steering wedge until I bought that excel, and I didnt really like it at all. The power steering on my v8 was deleted due to pump clearance, and I'd always had a hankering after re-instating it as I have the bits and would use a remote saxo/ax electric pump mounted remotely, but after trying it, I'm not going to bother. I also have a smaller seering wheel on mine. Yes, it gives you a bicep workout, but I'd have no qualms about switching to a lighter, simpler manual rack witht he stock wheel if its only you thats going to be driving it. Different story if your wife is going to be parking it perhaps?
  8. any update on this post alignment check Michael?
  9. I suspect diff output bearing failure. Had a funny "wiggle" develop on mine when I lifted off the throttle. Partially dialled it out with adjustment, but its still there. Got in and out play on the lhs of the diff of about 1cm... Still not fixed it/investigated any further.
  10. Yes, it has been done on a series 1 elite, but it required considerable cutting into the passenger footwell to mount the turbo.
  11. Slow cranking and a melted wire would suggest an earthing problem or a faulty starter. Random left field thought.... I once did an oil change on a mates nova 1L, and only ever having worked on engines of a proper size, put far too much oil in it. The result was very slow cranking, as the crank was immersed On 907's, the dipstick tube can break, allowing the oil level reading to become ridiculous. Did you perhaps over fill the sump? Probably not the above, but thought it worth mentioning. Also, I recall an issue on a Volvo 244 with a stromberg carb whose rubber diaphragm split. Car wouldnt start - took a long time to find that issue. Wouldnt affect the cranking speed however. Good luck with tracing it.
  12. I read somewhere that the Pilkington mould has warped and their screens dont fit anymore. No direct experience, just something I read somewhere.
  13. tentative interest Dan... PM me?
  14. It is possible to swap out a wheel cylinder with the diff in situ. It is a pig of a job, but so is taking out the entire diff.
×
×
  • Create New...

Important Information

We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffic. By clicking " I Accept ", you consent to our use of cookies. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.