Nelly Posted December 21, 2018 Report Share Posted December 21, 2018 Much to my annoyance I have kerbed one of the rear wheels on my Evora. Its a 2010 car with the forged alloys finished in Anthracite. I have been to Th e Wheel Specialist in Fareham (who I have heard good things about), but their standard Anthracite/Charcoal colour is quite a bit different. They have asked me for a colour reference if possible. So..does anyone know what the actual colour these wheels were painted, I am worried about a getting a good match. If anyone has any experience of repair to these colour wheels I would also be interested to hear, along with any other local to me (South Hampshire) recommendations for repairers. Quote Link to comment Share on other sites More sharing options...
Bibs Posted December 21, 2018 Report Share Posted December 21, 2018 This colour? Quote 88 Esprit NA, 89 Esprit Turbo SE, Evora, Evora S, Evora IPS, Evora S IPS, Evora S IPS SR, Evora 400, Elise S1, Elise S1 111s, Evora GT410 Sport Evora NA For forum issues, please contact the Moderators. I will aim to respond to emails/PM's Mon-Fri 9-6 GMT. Link to comment Share on other sites More sharing options...
Nelly Posted December 21, 2018 Author Report Share Posted December 21, 2018 Yeah that would be the one! Thanks Bibs. I can't believe they even went to the same place as me. I did a search but didn't find this one. Quote Link to comment Share on other sites More sharing options...
JAWS Posted December 21, 2018 Report Share Posted December 21, 2018 Be aware the Stealth Grey of the Cast Wheel is different to the Anthracite of the Forged Wheel. You may struggle to get a decent match, so it might be wise to do both front and rear at the same time. Also, it might be prudent to verify if the finish is original in the first place. Quote Link to comment Share on other sites More sharing options...
Ledlights Posted December 21, 2018 Report Share Posted December 21, 2018 I contacted Rimstock and they couldn’t give me a code for my LE forged wheels. They said that the finished colour was the result of a number of layers that have been heat treated and couldn’t give a specific code. I think you’d have to get a colour specially made to match. Quote Link to comment Share on other sites More sharing options...
Nelly Posted December 22, 2018 Author Report Share Posted December 22, 2018 Thanks, and that's what is bugging me and probably the main reason I am so annoyed I kerbed it. I was told yesterday they would prefer to do both wheels on one side to avoid any off colour between front and back. Will see how it goes. Other option is to do them all gloss black (it really will be like a sports racer then!). Quote Link to comment Share on other sites More sharing options...
Techyd Posted December 22, 2018 Report Share Posted December 22, 2018 If you go gloss black, be interested to know price / quality as I’ve been thinking about that for mine (currently stealth grey cast alloys). I’m also very close to Fareham so interested in service / standard of work as well! Quote Link to comment Share on other sites More sharing options...
Whitey Posted January 11, 2021 Report Share Posted January 11, 2021 Following on from this, has anybody found out the paint code for the Anthracite Forged alloy wheels (not the cast ones in a similar colour) as I want to touch in some small chips, ta! Quote Link to comment Share on other sites More sharing options...
Nelly Posted January 18, 2021 Author Report Share Posted January 18, 2021 No I didn't, strangely enough last month (only two years later) I finally got all four wheels re-finished gloss black and I have to say I am delighted, it suits my car better than the grey did. I will post a pic if interested. £430 for all four including Boris 20%. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.