plenty 39 Posted January 10, 2019 Report Share Posted January 10, 2019 Is it worth replacing them if there is some surface corrosion? (E.g. risk of accelerated wear to aux belt.) Quote Link to post Share on other sites
LotusLeftLotusRight 1,327 Posted January 11, 2019 Report Share Posted January 11, 2019 I haven't checked mine, but I would be very surprised if there is any corrosion at the pulley surface in the groove where it actually makes contact with the belt. You could always just clean them up yourself, if they don't look nice. 1 Quote Link to post Share on other sites
agentdr8 150 Posted January 11, 2019 Report Share Posted January 11, 2019 Just to clarify, there's no aux belt, just a single serpentine that drives all of the accessories (and supercharger, if so equipped). Unless the corrosion is really bad, or closer to the center bearing on the pulleys or accessories, I probably wouldn't worry too much about it. Quote Link to post Share on other sites
Bravo73 1,350 Posted January 11, 2019 Report Share Posted January 11, 2019 Yep I think that it is called the ‘aux belt’ because of ‘Auxiliaries Belt’, not ‘auxiliary belt’. IYSWIM. Quote Link to post Share on other sites
Chillidoggy 4,396 Posted January 11, 2019 Report Share Posted January 11, 2019 ‘Auxiliaries’. Quote Margate Exotics. Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.