free hit
counters
Rear cam O-ring - Engine/Ancilliaries - The Lotus Forums Jump to content
RS blu

Rear cam O-ring

Recommended Posts

Hi to all, I would like to change my rear cam cover oring, someone did it.(near the turbo cover plate)
I think it is enough to remove the screws and remove the turbo cover and the circle cam cover, or do I have to pay attention to something else?
Do I have to put some grease or oil on the new orings?

thanks🙂

Edited by RS blu

Share this post


Link to post
Share on other sites
Upgrade today to remove Google ads and support TLF.

This is a straightforward repair.

I THINK some folks used a sealer on new o rings, too. (Are we all afraid?  LOL)

 

It is always a good idea to use some sort of lubricant on newly fitted o-rings during assembly. Don't use anything that will affect rubber (petroleum based stuff is a no-no.)   This stuff in the link below is specifically for the process, but I just use a thin smear of Sil-Glyde.  I'm sure there is something similar in your locality.

https://p80lubricants.com/2017/06/16/the-best-solution-for-easy-automotive-rubber-assembly/

 

image.png.edb2150e3aba5c41163360d8264ed9bd.png

 

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...