free hit
counters
Switch pack - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other - The Lotus Forums Jump to content

Recommended Posts

I need to remove my switch pack from behind the speedo dash so that it can be repaired 

 

how do I go about getting access to the switch pack behind the dash?

Share this post


Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.

I sent of my switch pack to technozen electrics on eBay for £40 to get repaired and Now all lights are working 

I also got the invoice explaining what had failed on the switch and the parts that got replaced (he uses a rig to check all parts of the circuit board so I kinda need to check everything else before going back to him)

 

I did a Sunday morning run today and went to use the horn and that is no longer working 

 

what should i check to find the fault?

 

Share this post


Link to post
Share on other sites

When I took my steering column shrouds off, I managed to knock the horn cable off (number 5 in picture below). Might be worth checking.

32_05.gif

Share this post


Link to post
Share on other sites

I have checked the number 5 wire and that is not loose and also checked all fuses and are all ok

so could it be the horn now or another loose or rusty connection somewhere else?

Share this post


Link to post
Share on other sites

Found it 

 

it was this that had come offspacer.pngspacer.png

 

Can’t send picture for some reason but it was the small purple wire that sits in the topside of the column 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...