free hit
counters
Input shaft - Page 2 - Gearchange/Gearbox/Clutch - The Lotus Forums #ForTheOwners Jump to content


Input shaft


Recommended Posts

My circlip had rusted away and you could just pull the input shaft out of the gearbox...

100-9011.jpg

You can see how it had started to push the bearing into the end of the crank...

100-9000.jpg

So I fitted one of Harry's uprated circlips but I didn't fit the spacer behind the bearing in the crank as I was concerned how I would get the bearing out in future if I needed to. To remove the old one I packed it with grease and then hit a round bar into the hole to force the bearing out...

100-9002.jpg

So I wasn't sure if that would work with a spacer behind it and with the new circlip is shouldn't be a problem anyway.

Edited by Paul Coleman
  • Like 1

Lotus Esprit [meaning] a 1:1 scale Airfix kit with a propensity to catch fire

Link to comment
Share on other sites


Upgrade today to remove Google ads and support TLF.
1 hour ago, dsvitesse1 said:

Hi, the spring load is so strong that eventually the input shaft will " drill " itself in the crank shaft.

 

I was wondering if there were any early indications like noises, juddering or vibrations etc so corrective action could be taken before the crankshaft and other components got ruined. 

Edited by ekwan
Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...