free hit
S4 wiper and pivot assembly - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC - The Lotus Forums Jump to content

S4 wiper and pivot assembly

Recommended Posts

Hi all, got wiper blade from SJ. It wouldn’t stay fixed in arm.Enlarged pin channel by about 1.5mm(to match the old wiper pin) to accept the fixing “tab”.Still not firmly fixed to arm. I think there is too much play from wear in mechanism that holds the “tab” etc. I want to investigate this and refurbish the pivot plate etc.

My question.     Can l remove the 2 screws that hold the pivot plate without the bits they go into moving or falling so putting the plate back will not be a problem.

parts diagram.  17.21a.  25,27,28,29.

Thanks for any help.

Share this post

Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...