pureguava 59 Posted April 19, 2020 Report Share Posted April 19, 2020 Hello again. thanks for all replies for my previous questions - sorry if this answered somewhere but I can’t find it - even in the service manual? i want to replace the front brake shields on the S4S and it see I need to remove the hub..... I have the uprights / brake assembly on the bench - have removed the discs ( very easy one hex headed bolt ) and have removed the main (30mm socket head) nut I can’t find any info on removing the hub from upright stub axle I suspect it drifts out with some careful hammer blows ..... any tips ? Quote Link to post Share on other sites
Chillidoggy 4,466 Posted April 19, 2020 Report Share Posted April 19, 2020 Once the bearing nut is off, it should just slide off of the hub. A rubber mallet might be useful. Quote Margate Exotics. Link to post Share on other sites
pureguava 59 Posted April 24, 2020 Author Report Share Posted April 24, 2020 I used a 3 prong gear puller - it took a bit of force..... Quote Link to post Share on other sites
red vtec 203 Posted April 24, 2020 Report Share Posted April 24, 2020 When I did mine I used a rubber mallet to whack em off. Quote Amateurs built the Ark Professionals built the Titanic "I haven't ridden in cars pulled by cows before" "Bullocks, Mr.Belcher" "No, I haven't, honestly" Link to post Share on other sites
pureguava 59 Posted April 24, 2020 Author Report Share Posted April 24, 2020 I was whacking away like a school boy but no joy .... had a big tool too 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.