free hit
Hand pump for turbo actuator - Induction/Turbo/Chargecooler/Manifold/Exhaust - The Lotus Forums #ForTheOwners Jump to content

Hand pump for turbo actuator

Recommended Posts

Upgrade today to remove Google ads and support TLF.
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 1 month later...

I used a simple bike pump. As for the pressure readings which need to be accurate, I used the ... manifold air pressure sensor to get live reading with a PC (of course you have to temporarily route the sensor to the capsule actuator but there is all you need on the car already (a couple of Ts are available near the rear vacuum pump)

Edited by Giniw
Link to comment
Share on other sites

  • Gold FFM

I made one using a bulb pump, a cheap low pressure gauge from Amazon or Ebay (can't remember which), some hose and a couple of fitting. The bulb pump has a one way valve so depending on which side you use it sucks or blows. 🙂





Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...