free hit
counters
Differential pre load check - Gearchange/Gearbox/Clutch - The Lotus Forums Jump to content


Recommended Posts

I am ready to reassemble my 89 turbo esprit SE gearbox and wanted to check the diff preload. I only stripped the box to replace the primary shaft seal so didn't remove primary and secondary shafts.  The manual has a procedure for diff checking but it looks like it's done with these shafts removed.  Is there another way that avoids me removing the shafts? 

 

Alan

Link to post
Share on other sites
  • 2 weeks later...

Upgrade today to remove Google ads and support TLF.
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

it really doesn't take much to remove the shafts...

There is no pre-load measurement with the shafts in place. You could measure the backlash at the crownwheel to see if the gap has opened up. If you have replaced the bearings, races, or adjusted the differential pre-load nut... then Don't worry about it. No need to change the differential pre-load unless you've noticed some noise or an issue, or replaced those things.

Travis

Vulcan Grey 89SE

My Lotus Photo and Projects Album

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...