DWG / CAD file for the engine block

[nicholden]

Hi Guys,

I am installing a Suraru WRX 6 speed gearbox behind a GT3 (2.0L) engine. I need to machine an adapter plate, so I was wondering if anyone on here has a CAD file of either the back of the engine or the bell housing?
If so that would greatly assist and be much appreciated!

Cheers, Nick 

[v8GTmac1]

I have done a great deal of searching and I finally struck gold with this gentlemen that appears to be Canadian. There you will find as you scroll down, all the dimensions you need. Dont miss the part where the flywheel sits 25.1mm in the engine block which you will have to make up for. 

Especially if you are using the Subby flywheel re-drilled that means 25.1mm adapter plate plus whatever your 907 crank mating surface comes out past the bellhousing mating surface. Let me know how it goes!

http://electric-wrx.epizy.com/adapter.html?i=1