LotusCup Posted May 20, 2020 Report Share Posted May 20, 2020 Anyone here got big brake kit for the front then transfered the 2 piston caliper on the rear? Where can I get the caliper brackets? Thanks! Quote Link to comment Share on other sites More sharing options...
drdoom Posted May 23, 2020 Report Share Posted May 23, 2020 Attached link to the site of some American chaps who seem quite on the ball, likely help out with this. https://www.boefab.com/ Cheers Quote Link to comment Share on other sites More sharing options...
Petrolgeneration Posted June 5, 2020 Report Share Posted June 5, 2020 Why would you do so? I drive my car on track a lot and I beat it hard. Still no need for brake upgrade. Just get decent race pads and you're good on stock power! I can recommend Pagid RS14 brake pads. Zero fade and stops like crazy. Just replace the discs if they are worn out by a bigger set. That's what I'm doing. Quote Link to comment Share on other sites More sharing options...
LotusCup Posted June 5, 2020 Author Report Share Posted June 5, 2020 (edited) Yup exactly what I'm getting! At first I was gonna get an AP 4pot for the front, but then decided to just get alloy bells disc rotors and Pagid RS14 pads.. At least i didn't get additional weight on the car! And get around 10lbs. of unsprung weight too 🙂 Edited June 5, 2020 by Bibs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.