Reduced revs limiter

[JCERB 36]

Today I replaced the KT EX370 filter element for a new one and at full throttle hits the limiter at 6500 RPM. It had done this a while back prior to fitting new plugs, which sorted that in conjunction with a slight rough idle, but alas it's doing it again, but without the rough idle. Plugs were replaced about 100 miles ago. I am running the KT map as part of the kit, and have been for nearly 2 years now. Just wondering what it could be? No warning lights.

Cheers.

[Harald32 9]

The rev limiter operates at 6600 rpm in tour mode and at 7000 rpm in sport or racemode

[JCERB 36]

Thanks to you Herald, you made my afternoon, top man! I never even knew that🤣

[Harald32 9]

I was happy to amuse you

[PJ 82]

On 25/05/2020 at 08:45, Harald32 said:

The rev limiter operates at 6600 rpm in tour mode and at 7000 rpm in sport or racemode

This is for all Exiges? I have a S but fitted with the newer dash layout with the three red lights. Are there also set revs to each light? 

[Harald32 9]

v6 and Sport 350 work like this.

380 has less rpm anyway due to the valve control

410 and 430 I don’t know. 

[PJ 82]

Clear, where do the 3 red oval lights stand for which you get when revs go to max? 

[Kristof Thys 191]

@PJ

1. Time

2. To

3. Shift

 

😀

[PJ 82]

@Kristof Thyshahahahaha, fantastic!