free hit
counters
Carbs Rebuilt But Needing Adjustment - Fuel System/Carbs - The Lotus Forums Jump to content
Sign in to follow this  
jetace25

Carbs Rebuilt But Needing Adjustment

Recommended Posts

Hello,

After years off the road my S3 is running again. I rebuilt the carbs very carefully but the engine sounds like a truck. The synchrometer gives 3.5 kg/h for cylinders 3 & 4 at idle and 5.5 and 6.5 for 2 and 1 respectively. I'm going to adjust the openings between the two carbs first and then check the idle before fiddling with the mixture screws as I often change the mixture first and always regret it. The mixture screws weren't touched in the rebuild. Has anyone any suggestions?

#1 is spitting fine drops of fuel out of the trumpet - what does this mean?

Thanks,

Si

Edited by jetace25

Share this post


Link to post
Share on other sites

Upgrade today to remove Google ads and support TLF.

Nice rebuild! :P

1. Check float heights

2. Set timing

3. Synch Carbies (flow meter, vacuum or rubber hose techniques)

4. Adjust idle flow screws (colourtune or two-leads off at a time techniques)

5. redo 2-4

Here is a couple of fact sheets / products from 'The Elan Factory' I found helpful:

http://www.elanfactory.com.au/pdf/technica...arburettors.pdf

http://www.elanfactory.com.au/pdf/technica...0adjustment.pdf

http://www.elanfactory.com.au/pdf/product_...park%20plug.pdf

http://www.elanfactory.com.au/pdf/product_...%20Balancer.pdf

Iain

Edited by iainskea

Share this post


Link to post
Share on other sites

Thanks for the compliment Iain and for your helpful words and links. I started fiddling before I found your posting and although the car runs a little better, following the procedure in your links will help me do a better job.

The car doesn't feel right yet. The clutch feels wildly agressive - far more so than than I remember it and one of the front wheels feels wobbly - more things to investigate. Having it off the road for so long was no way to treat a 32,000 mile S3. :lol:

Thanks again,

Si

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...