free hit
Wiper at 12 o’clock position. - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other - The Lotus Forums Jump to content

Recommended Posts

Upgrade today to remove Google ads and support TLF.
  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

As the wiper motor uses a park cam, you need to physically reclock the wiper arm to 12 o clock position.

Because of this non-electronic "land mechanism", it happens that the wiper doesn't stop dead center, so few mm's off, which will show.


Anyway, reclock the actuator arm with 13mm spanner and reset to 12 position on the motor spline.  You might need to remove the fuse box and the wiper mechanism cover.

Good luck, plz show us the final result.

Edited by Kristof Thys
wasn't clear - thanks for Dave clearifying
Link to post
Share on other sites

@Seriouslylotus Dave is absolutely right, sorry I wasn't clear in my explanantion.  You need to reclock the actuator arm: loosen the 13mm nut that connects the arm on the motor (no need to take off) and loosen the arm from the motor spline.  Then rotate the wiper and tighten.


Edited by Kristof Thys
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...