Diablos-666 Posted August 10, 2020 Report Share Posted August 10, 2020 I’m looking at getting a set from Elise Shop to replace the plastic ones on my V6S. Just wondering if anyone else has bought a set and if they just stuck them down or if they come with a pre-drilled hole. Quote Link to comment Share on other sites More sharing options...
Kristof Thys Posted August 10, 2020 Report Share Posted August 10, 2020 I have them. What hole are you refering to? If it's the two holes "at the back" they come with, I just used a blanking plug to plug them as they have no use? Just pull hard on the OEM ones, add some padding on the new ones to "under fill" the gap and done. On a side note: they are not a 100% exact fit... (I have the matte ones) Quote Link to comment Share on other sites More sharing options...
Diablos-666 Posted August 10, 2020 Author Report Share Posted August 10, 2020 The Matt ones look really good, I think I’ll get the same. I don’t want the glossy ones in case they reflect the sun too much. What did you use to stick them down? I was thinking of using double sided 3m tape with 3m primer. The plugs are a good idea, I didn’t really want to drill holes in the sill. Quote Link to comment Share on other sites More sharing options...
Kristof Thys Posted August 10, 2020 Report Share Posted August 10, 2020 @Diablos-666 jup, 2 small strips of 3m vhd on mine. Mind that the matte carbon is not protected so you can't polish scratches out like the gloss version. Therefore I had thel wrapped in Xpel Stealth. Looks great! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.