Lotus Elan SE Turbo M100 Not Starting

[MaccaMcB 1]

Hi

I have a 92 Elan SE Turbo that has been standing for 10 years. I have replaced the fuel pump that was u/s and is now working ok. I am getting a spark at the plugs but the engine is not firing. I put some petrol down the ports and it did start (although for a short time and stuttering)

It feels like fuel isn't getting to the ports - but any ideas? And is there an easy way of testing that fuel is getting to the injectors? I assume that I wouldn't have four injectors not working and the car turns over fine but there is just no sign of life

Any ideas would be greatly appreciated

Cheers MaccaMcB

[theelanman 511]

also check the fuel rail.......

best place to ask is

www.lotuselancentral.com

[Escape 797]

It could be a blocked fuel filter. Check for fuel at the rail, the try removing the rail with the injectors. If you put a piece of cardboard or similar under the injectort, you should see fue drops when you crank the engine.

Filip

[MaccaMcB 1]

Many thanks to you both for the suggestions.

[LOTUSMAN33 1,470]

Check your power supply to the injectors? 
Where are you based as if local happy to pop out and help?

Dave  

[MaccaMcB 1]

Thanks Dave - I have just updated my profile with my location....based at Tonbridge Kent so I think a long way from you in the South West. I appreciate the offer though.

I'll take a look at the power supply to the injector though....

Many thanks again

MaccaMcB