JCERB Posted December 17, 2020 Report Share Posted December 17, 2020 I have recently purchased a new set of OE wheel nuts for my Exige V6S, but the bling of the bright zinc with a blue tinge looks too much. Are there any other alternatives, because against gloss black they don't really work in my opinion. A nice matt grey to go with the AP logo and bells would look best. Has anyone looked into this before? I'm not a huge fan of black ones either. Cheers. Quote Link to comment Share on other sites More sharing options...
Gold FFM C8RKH Posted December 17, 2020 Gold FFM Report Share Posted December 17, 2020 IIRC Dave at @Seriouslylotus has options for you to check out. Quote I came into this world screaming and covered in someone elses blood. I'll probably leave it in the same way. Link to comment Share on other sites More sharing options...
nordschleife666 Posted December 17, 2020 Report Share Posted December 17, 2020 you mean nug bolts? go for titanium one, m12x1.5x28 is the right size for V6S Quote Link to comment Share on other sites More sharing options...
Tex Posted December 17, 2020 Report Share Posted December 17, 2020 4 hours ago, C8RKH said: IIRC Dave at @Seriouslylotus has options for you to check out. Can’t see any black or grey ones on there only the silver Quote Link to comment Share on other sites More sharing options...
Karls Posted December 17, 2020 Report Share Posted December 17, 2020 If you look under ‘S2’ you will find the black ones which fit although they don’t have the conical washers, they’re one piece. Quote Link to comment Share on other sites More sharing options...
Tex Posted December 17, 2020 Report Share Posted December 17, 2020 35 minutes ago, Karls said: If you look under ‘S2’ you will find the black ones which fit although they don’t have the conical washers, they’re one piece. Ok , but you need 20 not 16 for an Exige and they might be too short compared to the V6 Evora, Exige 430 cup Kit Quote Link to comment Share on other sites More sharing options...
Gold FFM C8RKH Posted December 17, 2020 Gold FFM Report Share Posted December 17, 2020 12 minutes ago, Tex said: Ok , but you need 20 not 16 for an Exige and they might be too short compared to the V6 Evora, Exige 430 cup Kit Just PM Dave on here, he often comes on and he will keep you right, or call him. He's a really nice chap. 2 Quote I came into this world screaming and covered in someone elses blood. I'll probably leave it in the same way. Link to comment Share on other sites More sharing options...
Seriouslylotus Posted December 18, 2020 Report Share Posted December 18, 2020 21 hours ago, C8RKH said: Just PM Dave on here, he often comes on and he will keep you right, or call him. He's a really nice chap. OY stop saying nice things about me Tip = look for VX220 bolts 1 Quote Link to comment Share on other sites More sharing options...
Gold FFM C8RKH Posted December 18, 2020 Gold FFM Report Share Posted December 18, 2020 1 hour ago, Seriouslylotus said: OY stop saying nice things about me Tip = look for VX220 bolts Ha - well you were certainly a nice chap when I chatted to you in the rain at Oulton in October. Started to think you were such a nice chap you must have been a Lancastrian! Did you sort out the exhaust issue when you got back? Quote I came into this world screaming and covered in someone elses blood. I'll probably leave it in the same way. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.