free hit
Wiring, where should this connector go?? - Interior/Exterior/Lights/Glass/Alarms/ICE/HVAC/Other - The Lotus Forums #ForTheOwners Jump to content

Wiring, where should this connector go??

Recommended Posts

Had an issue with my CTEK charger which meant I removed the battery for testing, charger is to be replaced under warranty.

My question is when I removed the battery I found an unattached wire with a connector fitted and I don’t know where/if this should be connected.
The connector is black with two black wires, one wire has a purple sleeve on it, everything appears to work on the car, any ideas???? 





Link to comment
Share on other sites

Upgrade today to remove Google ads and support TLF.
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I will take a look at the weekend and see if I can trace where it’s from, I suspect that the connector goes into the back of the panel with the relays

Link to comment
Share on other sites

Posted (edited)

Xav, I’ve taken another look, removed the battery and undid the relay/fuse panel to see behind it. I thought that the connector may have gone into the back of the relay/fuse panel but from what I can see there are no connectors on the back of the relay/fuse panel. 
I’ve had a look all around that area and can’t find any other connectors that this connector would plug into. 
The attached pic shows the cable above my finger, it’s going into a loom that is running towards the engine bay / rear bulkhead. The loose connector is out of shot but it’s at the bottom of the pic.



Edited by Tony4147
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...