83epritturbo Posted April 14, 2021 Report Share Posted April 14, 2021 Hi, I ended up without any handbrake after pulling the lever very hard while trying to park the car in a steep hill. The cable operates well on both calipers but upon removal I found that the thread in the black part in the attached picture is damaged (on both calipers). Does anybody know where I can find a replacement part? I just need this black part and not the whole caliper. Thanks. Quote Link to comment Share on other sites More sharing options...
esprit22 Posted April 14, 2021 Report Share Posted April 14, 2021 Can only suggest you speak to Steve at S J Sports cars, he will know. 1 Quote Link to comment Share on other sites More sharing options...
Christian43 Posted April 16, 2021 Report Share Posted April 16, 2021 if they can't help try PNM Engineering as they do replacement callipers. I am slightly surprised the thread is damaged on both callipers, you are unlucky. Quote Link to comment Share on other sites More sharing options...
suitably.obscure Posted May 13, 2021 Report Share Posted May 13, 2021 I have had the same issue on both, I think its a design fault. Quote Link to comment Share on other sites More sharing options...
viz139 Posted July 5, 2021 Report Share Posted July 5, 2021 You say the "thread" is damaged, this is not a thread , its a ratchet. If you insert the piston and turn it 45 degrees it will not go in any further but it will pull straight out. I have found it very hard to get any information on these calipers never mind parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.