free hit
counters
W31SSN Exige 350 - V6 Exige Projects & Upgrades - The Lotus Forums #ForTheOwners Jump to content


W31SSN Exige 350


Recommended Posts


Upgrade today to remove Google ads and support TLF.

I think every time I went to BoT your car was always up on the ramp waiting parts.  Guessing you finally got the 2bular exhaust!

Link to comment
Share on other sites

@TonyKL I got the Komotec manifolds and y-pipe and kept the stock backbox.

@Exx Haha not too bad at all to be fair. Luckily the front isn’t set too low so it can get over most speed bumps. 

Link to comment
Share on other sites

So the car is running with OEM ride height ? I would like to change mine too but with OEM suspensions and splitter i m already touching some bumps

Link to comment
Share on other sites

5 hours ago, W31SSN said:

@TonyKL I got the Komotec manifolds and y-pipe and kept the stock backbox.

@Exx Haha not too bad at all to be fair. Luckily the front isn’t set too low so it can get over most speed bumps. 

Are you running this Komotec kit with the cut out for the baffled sump ?

ACA1001C-3ABA-4410-9DDC-33CDF50A6E4A.png

Link to comment
Share on other sites

I don’t think KT have yet found a way to fit pipes over a baffled sump without compresssing them 

Just an observation !

  • Like 1
Link to comment
Share on other sites

It is only the larger bore exhaust that has this problem. It is clearance to the gearbox that is the issue, rather than the sump.

Not KT manifolds and Y-pipe  in the images above - flat flanges with pressed gaskets rather than OE type machined flange with crush ring gaskets, suggests they are from Scotland.

Dave

Link to comment
Share on other sites

  • 2 weeks later...

Sounds an absolute blinder, Nathan, especially with it remaining useable around town. Looking forward to seeing this in person one day, I still can't get my head round what these CC TVS1900 installs feel like.

  • Like 1
Link to comment
Share on other sites

This is the KT  full system minus the Lotus exhaust valve manifolds which is attached to the HJS Cat in pic
 

The KT track Silencer does without the switchable valve/ manifold I believe 

 

5EE7DD99-A358-42F9-ACA6-5EA4E6E152D8.jpeg

Link to comment
Share on other sites

  • 2 weeks later...

Update: The Komotec Quiet Track exhaust has now been fitted, it sounds great, louder and deeper at idle however the drone on motorways is erm….. awful 😝. But I’m prepared to put up with it in order to attend track days.

BOT weighed both exhausts and the KT is about 4kg lighter than the existing 350 back box. 

Video of noise comparison to follow.

 

83388693-215F-453F-A88F-00ACD6F2C578.jpeg

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...