Grizzly Posted May 24, 2022 Report Share Posted May 24, 2022 I am putting A/C back into my Elite. I have the Lotus heater/ AC unit not shown in the Workshop manual. I am missing the largest hose connection. It is based on a 7/8 unf connection. I want just the swivel connection and a length of steel pipe as I will be fitting new hoses and which can be cut off the old hose. Thanks Brian Quote Link to comment Share on other sites More sharing options...
Neil D. Posted May 24, 2022 Report Share Posted May 24, 2022 try this http://www.rdent.com/manuals/elite_and_eclat/heater_and_ventilation/ hope it helps, Neil Quote Link to comment Share on other sites More sharing options...
EXCEL V8 Posted May 24, 2022 Report Share Posted May 24, 2022 Is it a straight fitting or 90/45 degree. I assume it's an SAE 45 degree flare? Pete Quote Link to comment Share on other sites More sharing options...
Grizzly Posted May 24, 2022 Author Report Share Posted May 24, 2022 Hello Neil, I do use this website occasionally. Unfortunately I do not have the Delinaire unit. Hello Pete, It is the 90 degree fitting I need. I'll look up SAE flared fittings to see if that is what it is. Thanks. Brian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.