Angus553 Posted October 24, 2022 Report Share Posted October 24, 2022 Hi According to my workshop manual the fluid amount should be at 1.14 litres,but with the back of the car jacked up with the rear wheels 6 inches off the ground its only possible to get around 900 ml of ep90 into the dif before the fluid starts running out of the filler plug hole. Any suggestions or do i just need to jack it up higher?? Thanks Angus Quote Link to comment Share on other sites More sharing options...
EXCEL V8 Posted October 24, 2022 Report Share Posted October 24, 2022 I'd have thought the car should be level to get the diff fill correct. Pete 2 Quote Link to comment Share on other sites More sharing options...
soldave Posted October 24, 2022 Report Share Posted October 24, 2022 Agreed. I would say if fluid is up to the bottom of the fill hole when the car is level then you should be good 1 Quote Link to comment Share on other sites More sharing options...
Angus553 Posted October 28, 2022 Author Report Share Posted October 28, 2022 Hi Guys, thanks for the input. Probably shouldve mentioned that on level ground the amount was still around 900ml. Managed to get another 50/60 ml in through the filler and refitted the plug. A bit happier now its at around 90% full. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.