Stevens Square Button Stickers

[superdavelotus]

Hi all,

Due to request from another thread, Iam trying to make some negative stickers for the centre of the buttons where they wear out. I borrowed some buttons but could only get 5 buttons. Iam trying to work out what the fifth one is?

So far I've drawn:-

Front Fog Light

Rear Fog Light

Side Lights

Headlights

Rear Dimister

Is the 5th one hazzard by any chance?

Once I've sorted this out I can see if my local sticker company can make a set so owners can refurbish their buttons. You have to pop the centre disc out which is held in place with a bit a glue. You can then remove the black negative logo with some T-cut. Iam not sure what other safe way to remove the old sticker without melting you old disc so I'll need some advise from you all.

Here what I've done so far. I've guessed the last one to be a hazzard button but you get the idea.

What to you think? The top ones are line drawings and bottom is the negative except the actual sticker will be to the next outline. I filled the circle in so you get a better picture on what they will look like.

[mr.oogieboogie]

hazzard lights dave

looking good

[Autocross7]

Very good... I'll def. place an order!

Cameron

[talon]

Yep - That'd be the hazzard insignia.

[superdavelotus]

Thanks guys, now I just need to find a printing company who'll print on clear film.

As soon as I have someone I'll get back to you.

Regards,

Dave Walters

[davegtst]

I'll probably have a set off you too.

[wiseraven]

Will they be printed on the reverse side so they won't rub off again Dave?

[superdavelotus]

Hi Phil,

hard to say is this will be the sticky side and I have to make it appear that it's the same as the OEM ones or else no one will want them. If you print on other side then it'll look too shiny.

These will only come out at a few quid per set so it's not as though it breaking the bank.

I'll see what the printer can do.

Dave Walters