Scrap bodyshell anywhere?

[yamaha_rd500v4 0]

My esprit has been reversed into before I bought it and has some nose damage caused by a towbar. The lower half of the car moulding is fine (too low to get damaged!) However the top half needs repair, specifically the section between the two headlight pods upto the front edge of the bonnet moulding, it a large chunk missing from the lotus badge all the way to the edge of the bonnet moulding.

Looking at it, it would seem to me the easiest way to do it properly, short of spending

[andydclements 760]

Assuming you're in the UK.

Lotusbits, Mike normally has lots of cars, so should be able to sort out the bits you need.

www.lotusbits.com

Andy

[philleech 54]

There is a chap in Stockport who had a front end very recently. He was selling esprit doors on ebay not that long ago.... I might still have his contact details if this helps as I bought a dashboard beam from him about three weeks ago.

Phil

[bigsi 0]

there was someone selling a complete bodyshell i saw the other week let me see if i can find it for you, save cutting and joining wouldnt it.

[SE Owner :-D 17]

There's a big welsh lad called simon with a dodgy red one covering some very shiny metal bits...

Failing that ESPRITISM had one i think and Pete PNM could probably help?

Edited December 20, 2007 by SE Owner :-D

[matk 17]

I don't know whether the S2 and S3 are the same, but I def think Pete at PNM has a spare front from an S2.

[silverfrost 1,387]

lotusbits 500 quid B) regards danny