jason S4s 0 Posted September 5, 2005 Report Share Posted September 5, 2005 Hi all, Anyone got any recomendations as to where I can get my injectors cleaned/tested? Cheers. Jason S4s. Quote Link to post Share on other sites
x6gas 2 Posted September 5, 2005 Report Share Posted September 5, 2005 Don't take this as gospel, but I did read a recommendation somewhere to take it to a garage used to dealing with commercial vehicles - apparently they know a thing or two about cleaning injectors for trucks... Quote Ian Link to post Share on other sites
DAVES_GT3 0 Posted September 5, 2005 Report Share Posted September 5, 2005 Don't take this as gospel, but I did read a recommendation somewhere to take it to a garage used to dealing with commercial vehicles - apparently they know a thing or two about cleaning injectors for trucks... <{POST_SNAPBACK}> ok if you have a multi meter/voltage meter. primary injectors should read 2 ohms and secondary injectors 16 ohms. freescan can tell you if you have the correct fuel passing. i.e: lean/rich y do you think you have a problem with them? dave Quote Link to post Share on other sites
Malc Holmes 2 Posted September 7, 2005 Report Share Posted September 7, 2005 Hi Jason, Marlin Motor Engineers in Bletchley, Milton Keynes. I had problems with my injectors (where as good as dead after standing for years). I took them in and three hours later they where as good as new, complete with report on flow figures and spray pattern. The set of 4 cost me Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.