trackmagic 4 Posted December 26, 2007 Report Share Posted December 26, 2007 Looking to see if there is an alternative reference for the S3 Turbo CV boots for my 1983 Esprit. Thanks, jeff Quote www.espritturbo.com Link to post Share on other sites
fguillont 0 Posted January 1, 2008 Report Share Posted January 1, 2008 i also need this all 4 are bad and need to replace them Quote Link to post Share on other sites
trackmagic 4 Posted January 4, 2008 Author Report Share Posted January 4, 2008 Can confirm they are the same as a Porsche 930. Just got one in and it matches up. Listing I used was 1979 930. Jeff Quote www.espritturbo.com Link to post Share on other sites
Esprit Aviation 2 Posted January 11, 2008 Report Share Posted January 11, 2008 (edited) I obtained boots that came complete w/ the metal flanges. I believe the price is very competitive. I have one NOS CV joint I would like to sell. I also can get CV joints which are 1.0 pound lighter than stock! I put four in and you can feel the difference. PM me if anyone is interested. Lee Edited January 11, 2008 by Esprit Aviation Quote KILL THE RUST! RUST REMOVAL Link to post Share on other sites
trackmagic 4 Posted January 11, 2008 Author Report Share Posted January 11, 2008 I obtained boots that came complete w/ the metal flanges. I believe the price is very competitive. I have one NOS CV joint I would like to sell. I also can get CV joints which are 1.0 pound lighter than stock! I put four in and you can feel the difference. PM me if anyone is interested. Lee Lee, would be interested in both of those items. Thanks, Jeff P.S. Your private email is full. Quote www.espritturbo.com Link to post Share on other sites
Esprit Aviation 2 Posted January 11, 2008 Report Share Posted January 11, 2008 Hi Jeff, Which items are you interested in? The boots w/ metal flanges, 1) NOS Lobro CV joint, or the lightweight CV joints? BTW: the lightweight ones have been used on vintage Ford GT40's for replacement joints, so they should hold up to anything your engine can produce! Thanks for the tip on my PM, I just cleaned it up a bit. Lee Quote KILL THE RUST! RUST REMOVAL Link to post Share on other sites
Esprit Aviation 2 Posted January 13, 2008 Report Share Posted January 13, 2008 Jeff, Tried to send a PM to you, but i'm not sure it went through. Lee Quote KILL THE RUST! RUST REMOVAL Link to post Share on other sites
Esprit Aviation 2 Posted January 23, 2008 Report Share Posted January 23, 2008 Jeff, MY last PM must not have gone through. Unfortunately, the lightweight joints are NLA until maybe midyear, and the price is going to increase substantially. I will try to seek other sources and decent prices. The good news is that I have the CV joint boot kits in stock. They are complete w/ cad plated metal flanges, Grease packs and clamps. The price per each is $26.00. If you want 4) There is a 10% discount. Lee Quote KILL THE RUST! RUST REMOVAL Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.