karmavore Posted September 21, 2005 Report Share Posted September 21, 2005 If you would like a set of top links like mine (see above) let me know. They are NOW AVAILABLE for $235/pair from Hyper Sport Engineering (http://www.hyper-sport.net/main.html). This will include new bolts. Kirt wants to know there is serious interest - like 10 people - if he is going to bother. So SPEAK UP! :-) Not sure if these are relevent to < SE cars. Lucas. Quote Luke Colorado, Super Spy. - Lotus Owner No Longer 1987 Zender Widebody 560SEC | 1994 Lotus Esprit S4 | 2013 Honda Fit EV (#269) Link to comment Share on other sites More sharing options...
Guest teigan Posted September 21, 2005 Report Share Posted September 21, 2005 how do you budget all these trivial upgrades batman? Quote Link to comment Share on other sites More sharing options...
karmavore Posted September 21, 2005 Author Report Share Posted September 21, 2005 <yawn> Quote Luke Colorado, Super Spy. - Lotus Owner No Longer 1987 Zender Widebody 560SEC | 1994 Lotus Esprit S4 | 2013 Honda Fit EV (#269) Link to comment Share on other sites More sharing options...
mike_sekinger Posted September 22, 2005 Report Share Posted September 22, 2005 (edited) Yes, I would be interested in a pair. I have a set of Penske light-alloy dampers with spherical top/bottom joints. The top link set would be a nice addition. I spoke to Kirt several years back when he was very first starting with Hypersport. It is great to see some items are starting to become available. Cheers, Mike S Edited September 22, 2005 by mike_sekinger Quote 1996 Esprit V8, 1998 Esprit V8 GT, 1999 Esprit S350 #002 (Esprit GT1 replica project), 1996 Esprit V8 GT1 (chassis 114-001), 1992 Lotus Omega (927E), 1999 Esprit V8SE, 1999 Esprit S350 #032, 1995 Esprit S4s, 1999 Esprit V8 GT (ex-5th Gear project), 1999 Esprit V8SE ('02 rear) 1999 S350 #002 Esprit GT1 replica Link to comment Share on other sites More sharing options...
Jonathan Posted September 22, 2005 Report Share Posted September 22, 2005 Forgive my ignorance but what's the spherical part ? I tike it these ar ethe camber adjusting tie rods you're talking about ? bit hard to see. Wish my car was that clean ! Quote facebook = jon.himself@hotmail.co.uk Link to comment Share on other sites More sharing options...
mike_sekinger Posted September 22, 2005 Report Share Posted September 22, 2005 Hey Jon, They are rose jointed as opposed to bushed. The trade off is accuracy (and sometimes hard noisey ride) vs. less accuracy (but more compliance). Cheers, Mike S Quote 1996 Esprit V8, 1998 Esprit V8 GT, 1999 Esprit S350 #002 (Esprit GT1 replica project), 1996 Esprit V8 GT1 (chassis 114-001), 1992 Lotus Omega (927E), 1999 Esprit V8SE, 1999 Esprit S350 #032, 1995 Esprit S4s, 1999 Esprit V8 GT (ex-5th Gear project), 1999 Esprit V8SE ('02 rear) 1999 S350 #002 Esprit GT1 replica Link to comment Share on other sites More sharing options...
karmavore Posted September 22, 2005 Author Report Share Posted September 22, 2005 I can try to take a better picture, if interested. I'll put you down, Mike. Kirt seems to make a ton of parts, but most are one-offs. I think he just gets to busy to bother "mas-producing" them. Lucas. Quote Luke Colorado, Super Spy. - Lotus Owner No Longer 1987 Zender Widebody 560SEC | 1994 Lotus Esprit S4 | 2013 Honda Fit EV (#269) Link to comment Share on other sites More sharing options...
Htown Posted September 22, 2005 Report Share Posted September 22, 2005 Forgive my ignorance but what's the spherical part ? I tike it these ar ethe camber adjusting tie rods you're talking about ? bit hard to see. Wish my car was that clean ! <{POST_SNAPBACK}> Spherical bearing...aka 'rod end' aka 'heim joint'...aka 'rose joint' etc... http://www.hrpworld.com/index.cfm?form_pic...t_id=143,40,363 Craig Quote "Firearms stand next in importance to the Constitution itself. They are the American people’s liberty teeth and keystone under independence." - George Washington Link to comment Share on other sites More sharing options...
Jonathan Posted September 22, 2005 Report Share Posted September 22, 2005 Ah - I understand, thanks Quote facebook = jon.himself@hotmail.co.uk Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.