refitting link arms

[diasafe]

Hi all

well all bushes have been replaced and link arms powder coated !!

PROBLEM is that the lower link arm where it bolts onto the hub carrier is at at a slightly diffferent angle to the hub carrier !!

do i have to release the trailing arm to refitt lower link ??

please help

many thanks

paul

[hilly]

You will need to do something as it will be a complete arse to get back in.

Easiest thing to do is remove the bottom of the two bolts that hold the trailing are to the rear upright and then tilt it. This should give enought of an angle change to get the bolt in, well it did on mine anyhow.

Hope this helps

Hilly

[diasafe]

You will need to do something as it will be a complete arse to get back in.

Easiest thing to do is remove the bottom of the two bolts that hold the trailing are to the rear upright and then tilt it. This should give enought of an angle change to get the bolt in, well it did on mine anyhow.

Hope this helps

Hilly

<{POST_SNAPBACK}>

thanks Hilly

will give a go

paul